CS8147 Datasheet PDF - Cherry Semiconductor Corporation 10V/5V Low Dropout Dual Regulator with ENABLE Specs

CS8147 - 10V/5V Low Dropout Dual Regulator with ENABLE

Datasheet Summary

Description

The CS8147 is a 10V/5V dual output linear regulator.

The 10V ±.5% output sources 500mA and the 5V ±3% output sources 70mA.

The secondary output is inherently stable and does not require an external capacitor.

Features

s Two Regulated Outputs 10V ± 5%; 500 mA 5V ± 3%; 70 mA s 70µA SLEEP Mode Current s Inherently Stable Secondary Output (No Output Capacitor Required) s Fault Protection Overvoltage Shutdown Reverse Battery 60V Peak Transient -50V Reverse Transient Short Circuit Thermal Shutdown s CMOS Compatible ENABLE Input with Low (IOUT(max)) Input Current. Absolute Maximum Ratings Input Voltage (VIN) DC -18V to 26V Positive Peak Transient Voltage (46V Load Dump @ VIN = 14V) 60V Negative Peak Transient Volta.

Datasheet Details

Part number	CS8147
Manufacturer	Cherry Semiconductor Corporation
File Size	173.16 KB
Description	10V/5V Low Dropout Dual Regulator with ENABLE
Datasheet	CS8147 Datasheet
Additional preview pages of the CS8147 datasheet.

📁 Similar Datasheet

CS8147 - Low Dropout Linear Regulator (ON Semiconductor)

CS8101 - Low Dropout Linear Regulator (ON Semiconductor)

CS810N3A - TRIACS (JILIN SINO)

CS8118E - Built-in 16x gain mono Class-D audio power amplifier (ChipSourceTek)

CS8120 - Linear Regulator (ON Semiconductor)

CS8121S - Filterless Class-D audio amplifier (Chipstar Micro-electronics)

CS8122 - Low Dropout Linear Regulator (ON Semiconductor)

CS8122S - 3.0W mono ultra-low EMI / filterless Class-D audio amplifier (Chipstar)

CS8126 - Low Dropout Linear Regulator (ON Semiconductor)

CS8126T - 3.1W mono ultra-low EMI filter-free Class D audio amplifier (Chipstar)

Full PDF Text Transcription

Click to expand full text

CS8147 CS8147 10V/5V Low Dropout Dual Regulator with ENABLE Description The CS8147 is a 10V/5V dual output linear regulator. The 10V ±.5% output sources 500mA and the 5V ±3% output sources 70mA. The secondary output is inherently stable and does not require an external capacitor. The on board ENABLE function controls the regulatorÕs two outputs. When ENABLE is high, the regulator is placed in SLEEP mode. Both outputs are disabled and the regulator draws only 70µA of quiescent current. The regulator is protected against overvoltage conditions. Both outputs are protected against short circuit and thermal runaway conditions. The CS8147 is packaged in a 5 lead TO-220 with copper tab. The copper tab can be connected to a heat sink if necessary.

Published: Mar 24, 2005 |