Datasheet4U Logo Datasheet4U.com

CS8147 - Low Dropout Linear Regulator

General Description

PACKAGE LEAD # 5 Lead TO

220 1 2 3 4 5 LEAD SYMBOL ENABLE VIN GND VOUT1 VOUT2 FUNCTION CMOS compatible input lead; switches VOUT1 and VOUT2 on and off.

When ENABLE is low, VOUT1 and VOUT2 are active.

Supply voltage, usually direct from battery.

Key Features

  • Two Regulated Outputs.
  • 10 V ±5.0%; 500 mA.
  • 5.0 V ±3.0%; 70 mA.
  • 70 µA SLEEP Mode Current.
  • Inherently Stable Secondary Output (No Output Capacitor Required).
  • Fault Protection.
  • Overvoltage Shutdown.
  • Reverse Battery.
  • 60 V Peak Transient.
  • 50 V Reverse Transient.
  • Short Circuit.
  • Thermal Shutdown.
  • CMOS Compatible ENABLE Input with Low (IOUT(max)) Input Current 1 TO.
  • 220.

📥 Download Datasheet

Datasheet Details

Part number CS8147
Manufacturer onsemi
File Size 112.17 KB
Description Low Dropout Linear Regulator
Datasheet download datasheet CS8147 Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com CS8147 10 V/5.0 V Low Dropout Dual Regulator with ENABLE The CS8147 is a 10 V/5.0 V dual output linear regulator. The 10V ±5.0% output sources 500 mA and the 5.0 V ±3% output sources 70 mA. The secondary output is inherently stable and does not require an external capacitor. The on board ENABLE function controls the regulator’s two outputs. When ENABLE is high, the regulator is placed in SLEEP mode. Both outputs are disabled and the regulator draws only 70 µA of quiescent current. The regulator is protected against overvoltage conditions. Both outputs are protected against short circuit and thermal runaway conditions. The CS8147 is packaged in a 5 lead TO–220 with copper tab. The copper tab can be connected to a heat sink if necessary. 1 http://onsemi.