CS8161 Datasheet PDF - Cherry Semiconductor Corporation 12V/ 5V Low Dropout Dual Regulator with ENABLE Specs

CS8161 - 12V/ 5V Low Dropout Dual Regulator with ENABLE

Datasheet Summary

Description

The CS8161 is a 12V/5V dual output linear regulator.

The 12V ± 5% output sources 400mA and the 5V ±2.0% output sources 200mA.

The on board ENABLE function controls the regulatorÕs two outputs.

Features

s Two regulated outputs 12V ±5.0%; 400mA 5V ±2.0%; 200mA s Very low SLEEP mode current drain 200nA s Fault Protection Reverse Battery (-15V) 74V Load Dump -100V Reverse Transient Short Circuit Thermal Shutdown Absolute Maximum Ratings Input Voltage Operating Range Ð15V to 26V Overvoltage Protection74V Internal Power Dissipation Internally Limited Junction Temperature RangeÐ40¡C +150¡C Storage Temperature RangeÐ65¡C to +150¡C Lead Temperature Soldering Wave Solder (through hole styles only)10 se.

Datasheet Details

Part number	CS8161
Manufacturer	Cherry Semiconductor Corporation
File Size	198.45 KB
Description	12V/ 5V Low Dropout Dual Regulator with ENABLE
Datasheet	CS8161 Datasheet
Additional preview pages of the CS8161 datasheet.

📁 Similar Datasheet

CS8161 - Low Dropout Dual Regulator (ON Semiconductor)

CS8101 - Low Dropout Linear Regulator (ON Semiconductor)

CS810N3A - TRIACS (JILIN SINO)

CS8118E - Built-in 16x gain mono Class-D audio power amplifier (ChipSourceTek)

CS8120 - Linear Regulator (ON Semiconductor)

CS8121S - Filterless Class-D audio amplifier (Chipstar Micro-electronics)

CS8122 - Low Dropout Linear Regulator (ON Semiconductor)

CS8122S - 3.0W mono ultra-low EMI / filterless Class-D audio amplifier (Chipstar)

CS8126 - Low Dropout Linear Regulator (ON Semiconductor)

CS8126T - 3.1W mono ultra-low EMI filter-free Class D audio amplifier (Chipstar)

Full PDF Text Transcription

Click to expand full text

CS8161 CS8161 12V, 5V Low Dropout Dual Regulator with ENABLE Description The CS8161 is a 12V/5V dual output linear regulator. The 12V ± 5% output sources 400mA and the 5V ±2.0% output sources 200mA. The on board ENABLE function controls the regulatorÕs two outputs. When the ENABLE pin is low, the regulator is placed in SLEEP mode. Both outputs are disabled and the regulator draws only 200nA of quiescent current. The primary output, VOUT1 is protected against overvoltage conditions. Both outputs are protected against short circuit and thermal runaway conditions. The CS8161 is packaged in a 5 lead TOÐ220 with copper tab. The copper tab can be connected to a heat sink if necessary. It is also available in a 16 lead SO wide package. Features s Two regulated outputs 12V ±5.0%; 400mA 5V ±2.

Published: Mar 24, 2005 |