CS8161 Datasheet PDF - ON Semiconductor Low Dropout Dual Regulator Specs

CS8161 - Low Dropout Dual Regulator

Datasheet Summary

Description

PACKAGE LEAD # 5 Lead TO

220 1 2 3 4 5 LEAD SYMBOL VIN VOUT1 GND ENABLE VOUT2 FUNCTION Supply voltage, usually direct from battery.

Regulated output 12 V, 400 mA (typ).

Ground connection.

Features

http://onsemi. com TO.
220 FIVE LEAD T SUFFIX CASE 314D 1 5 TO.
220 FIVE LEAD TVA SUFFIX CASE 314K.
Two Regulated Outputs.
12 V ±5.0%; 400 mA.
5.0 V ±2.0%; 200 mA.
Very Low SLEEP Mode Current Drain 200 nA.
Fault Protection.
Reverse Battery (.
15 V).
74 V Load Dump.
100 V Reverse Transient.
Short Circuit.
Thermal Shutdown.
Pb.
Free Packages are Available.
1.

Datasheet Details

Part number	CS8161
Manufacturer	ON Semiconductor
File Size	123.82 KB
Description	Low Dropout Dual Regulator
Datasheet	CS8161 Datasheet
Additional preview pages of the CS8161 datasheet.

📁 Similar Datasheet

CS8161 - 12V/ 5V Low Dropout Dual Regulator with ENABLE (Cherry Semiconductor Corporation)

CS8164 - 8V/5V Low Dropout Dual Regulator with ENABLE (Cherry Semiconductor Corporation)

CS8101 - 100mA Low Dropout Linear Regulator (Cherry Semiconductor Corporation)

CS810N3A - TRIACS (JILIN SINO)

CS8118E - Built-in 16x gain mono Class-D audio power amplifier (ChipSourceTek)

CS8120 - 5V/ 300mA Linear Regulator with and ENABLE RESET (Cherry Semiconductor Corporation)

CS8121 - 5V/ 1A Linear Regulator with and ENABLE RESET (Cherry Semiconductor Corporation)

CS8121S - Filterless Class-D audio amplifier (Chipstar Micro-electronics)

CS8122 - 2% 5V 750mA Low Dropout Linear Regulator (Cherry Semiconductor Corporation)

CS8122S - 3.0W mono ultra-low EMI / filterless Class-D audio amplifier (Chipstar)

Full PDF Text Transcription

Click to expand full text

www.DataSheet4U.com CS8161 12 V, 5.0 V Low Dropout Dual Regulator with ENABLE The CS8161 is a 12 V/5.0 V dual output linear regulator. The 12 V ±5.0% output sources 400 mA and the 5.0 V ±2.0% output sources 200 mA. The on board ENABLE function controls the regulator’s two outputs. When the ENABLE pin is low, the regulator is placed in SLEEP mode. Both outputs are disabled and the regulator draws only 200 nA of quiescent current. The primary output, VOUT1 is protected against overvoltage conditions. Both outputs are protected against short circuit and thermal runaway conditions. The CS8161 is packaged in a 5 lead TO−220 with copper tab. The copper tab can be connected to a heat sink if necessary. Features http://onsemi.

Published: Apr 6, 2007 |