CRD5376 Datasheet | Cirrus Logic

Features z General Description The CRD5376 board is a reference design for the Cirrus Logic multichannel seismic chip set. Data sheets for the CS3301, CS3302, CS4373A, CS5371/72, and CS5376A devices should be consulted when using the CRD5376 reference design. Pin headers connect external differential geophone or hydrophone sensors to the analog inputs of the measurement channels. An on-board test DAC creates precision differential analog signals for in-circuit performance testing without an external signal source. The reference design includes an 8051-type microcontroller with hardware SPI™ and USB serial interfaces. The microcontroller municates with the digital filter via SPI and with the PC evaluation software via USB. The PC evaluation software controls register and coefficient initialization and performs time domain, histogram, and FFT frequency analysis on captured data. ORDERING INFORMATION CRD5376 Reference Design Four Channel Seismic Acquisition Node - CS3301 geophone amplifiers (2x) - CS3302 hydrophone amplifiers (2x) - CS5372 dual ∆Σ modulators (2x) - CS5376A quad digital filter (1x) - CS4373A ∆Σ test DAC (1x) - Precision voltage reference - Clock recovery PLL z On-board Microcontroller - SPI™ interface to digital filter - USB munication with PC z PC Evaluation Software - Register setup & control - FFT frequency analysis - Time domain analysis - Noise histogram analysis .cirrus. Copyright © Cirrus Logic, Inc. 2006 (All Rights Reserved) FEB ‘06 DS612RD1 Contacting Cirrus Logic Support For all product questions and inquiries contact a Cirrus Logic Sales Representative. To find the one nearest to you go to .cirrus. IMPORTANT NOTICE Cirrus Logic, Inc. and its subsidiaries ("Cirrus") believe that the information contained in this document is accurate and reliable. However, the information is subject to change without notice and is provided "AS IS" without warranty of any kind (express or implied). Customers are advised to obtain the latest...