PCH-45
PCH-45 is Axial Lead Power Chokes manufactured by Coilcraft.
- Part of the PCH-27 comparator family.
- Part of the PCH-27 comparator family.
Document 138-1
Axial Lead Power Chokes
- PCH-27, 45
PCH-27 Series
- Wide inductance range in a low profile part
- High saturation current- up to 14.3 Amps
- Standard EIA and custom values; most values shipped from stock
- Available with an optional heat-shrink sleeve for additional protention for the windings
Designers Kit P409 contains 2 each of 30 parts
Core material Ferrite
Core and winding loss See .coilcraft./coreloss
Terminations Ro HS pliant tin-silver over copper. Other terminations available at additional cost.
Weight PCH-27: 1.55
- 1.90 g; PCH-45: 6.16
- 8.34 g
Ambient temperature
- 40°C to +85°C
Storage temperature ponent:
- 40°C to +85°C. Tray packaging:
- 40°C to +80°C
Resistance to wave soldering heat: Max 260°C ±5°C for 20
- 40 seconds where leads meet core body
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Standard tray packaging PCH-27: 100 parts per tray (without sleeve); 60 parts per tray (with sleeve) PCH-45: 100 parts per tray (without sleeve); 80 parts per tray (with sleeve)
Optional tape and reel PCH-27: 1000 per 13″ reel; 10 mm part spacing PCH-45: 300 per 13″ reel; 15 mm part spacing Tape width: 75.5 mm; leads are trimmed to fit tape width.
PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf.
1.25 ±0.250 31,75 ±6,35
0.585 14,85 max
1.25 ±0.250 31,75...
