CY8C36 Datasheet | Cypress

Description With its unique array of configurable blocks, PSo C® 3 is a true system level solution providing microcontroller unit (MCU), memory, analog, and digital peripheral functions in a single chip. The CY8C36 family offers a modern method of signal acquisition, signal processing, and control with high accuracy, high bandwidth, and high flexibility. Analog capability spans the range from thermocouples (near DC voltages) to ultrasonic signals. The CY8C36 family can handle dozens of data acquisition channels and analog inputs on every general-purpose input/output (GPIO) pin. The CY8C36 family is also a high-performance configurable digital system with some part numbers including interfaces such as USB, multi-master inter-integrated circuit (I2C), and controller area network (CAN). In addition to munication interfaces, the CY8C36 family has an easy to configure logic array, flexible routing to all I/O pins, andcurrent DAC a high-performance single cycle 8051 microprocessor core. You can easily create system-level designs using a rich library of prebuilt ponents and boolean primitives using PSo C Creator™, a hierarchical schematic design entry tool. The CY8C36 family provides unparalleled opportunities for analog and digital bill of materials integration while easily acmodating last minute design changes through simple firmware updates. Features DC to 67 MHz operation Multiply and divide instructions ‡ Flash program memory, up to 64 KB, 100,000 write cycles, 20 years retention, and multiple security features ‡ Up to 8-KB flash error correcting code (ECC) or configuration storage ‡ Up to 8 KB SRAM ‡ Up to 2 KB electrically erasable programmable read-only memory (EEPROM), 1 M cycles, and 20 years retention ‡ 24-channel direct memory access (DMA) with multilayer AHB[1] bus access - Programmable chained descriptors and priorities - High bandwidth 32-bit transfer support - Low voltage, ultra low-power ‡ Wide operating voltage range: 0.5 V to 5.5 V ‡ High efficiency...