CYK001M16SCCA Datasheet | Cypress

.. CYK001M16SCCA Mo BL® 16-Mbit (1M x 16) Pseudo Static RAM Features - Advanced low-power Mo BL® architecture - High speed: 55 ns, 70 ns - Wide voltage range: 2.7V to 3.3V - Typical active current: 3 m A @ f = 1 MHz - Typical active current: 13 m A @ f = f MAX - Low standby power - Automatic power-down when deselected Functional Description[1] The CYK001M16SCCA is a high-performance CMOS pseudo static RAM (PSRAM) organized as 1M words by 16 bits that supports an asynchronous memory interface. This device Features advanced circuit design to provide ultra-low active current. This is ideal for providing More Battery Life™ (Mo BL) in portable applications such as cellular telephones. The device can be put into standby mode, reducing power consumption dramatically when deselected (CE1 LOW, CE2 HIGH or both BHE and BLE are HIGH). The input/output pins (I/O0 through I/O15) are placed in a high-impedance state when the chip is deselected (CE1 HIGH, CE2 LOW) or OE is deasserted HIGH, or during a write operation (Chip Enabled and Write Enable WE LOW). Reading from the device is acplished by asserting the Chip Enables (CE1 LOW and CE2 HIGH) and Output Enable (OE) LOW while forcing the Write Enable (WE) HIGH. If Byte Low Enable (BLE) is LOW, then data from the memory location specified by the address pins will appear on I/O0 to I/O7. If Byte High Enable (BHE) is LOW, then data from memory will appear on I/O8 to I/O15. See the Truth Table for a plete description of read and write modes. Logic Block Diagram A10 A9 A8 A7 A6 A5 A4 A3 A2 A1 A0 DATA IN DRIVERS ROW DECODER 1M x 16 RAM Array SENSE AMPS I/O0- I/O7 I/O8- I/O15 COLUMN DECODER BHE WE OE BLE BHE BLE CE2 CE1 CE2 CE1 Note: 1. For best-practice remendations, please refer to the Cypress application note “System Design Guidelines” on http://.cypress.. A11 A12 A13 A14 A15 A16 A17 A18 A19 Pow er Down Circuit Cypress Semiconductor Corporation Document #: 38-05426 Rev. - D - 3901 North First...