MB9B510T Datasheet | Cypress

MB9B510T Series 32-bit ARM® Cortex®-M3 FM3 Microcontroller The MB9B510T Series are highly integrated 32-bit microcontrollers dedicated for embedded controllers with high-performance and petitive cost. These series are based on the ARM® Cortex®-M3 Processor with on-chip Flash memory and SRAM, and has peripheral functions such as Motor Control Timers, ADCs and munication Interfaces (USB, CAN, UART, CSIO, I2C, LIN). The products which are described in this datasheet are placed into TYPE2 product categories in "FM3 Family Peripheral Manual". Features 32-bit ARM® Cortex®-M3 Core - Processor version: r2p1 - Up to 144 MHz Frequency Operation - Memory Protection Unit (MPU): improves the reliability of an embedded system - Integrated Nested Vectored Interrupt Controller (NVIC): 1 NMI (non-maskable interrupt) and 48 peripheral interrupts and 16 priority levels - 24-bit System timer (Sys Tick): System timer for OS task management On-chip Memories [Flash memory] - Up to 1 Mbyte - Built-in Flash Accelerator System with 16 Kbyte trace buffer memory - The read access to Flash memory can be achieved without wait cycle up to operation frequency of 72 MHz. Even at the operation frequency more than 72 MHz, an equivalent access to Flash memory can be obtained by Flash Accelerator System. - Security function for code protection [SRAM] This Series contain a total of up to 128 Kbyte on-chip SRAM memories. This is posed of two independent SRAM (SRAM0, SRAM1). SRAM0 is connected to I-code bus and D-code bus of Cortex-M3 core. SRAM1 is connected to System bus. - SRAM0: Up to 64 Kbyte. - SRAM1: Up to 64 Kbyte. External Bus Interface - Supports SRAM, NOR and NAND Flash device - Up to 8 chip selects - 8-/16-bit Data width - Up to 25-bit Address bit - Maximum area size: Up to 256 Mbytes - Supports Address/Data multiplex - Supports external RDY input USB Interface (Max 2 channels) USB interface is posed of Device and Host. [USB device] - USB2.0 Full-Speed...