S6E1C31B0A Datasheet | Cypress

S6E1C3 Series 32-bit ARM® Cortex®-M0+ FM0+ Microcontroller The S6E1C3 Series is a series of highly integrated 32-bit microcontrollers designed for embedded controllers aiming at low power consumption and low cost. This series has the ARM Cortex-M0+ Processor with on-chip Flash memory and SRAM, and consists of peripheral functions such as various timers, ADC and munication interfaces (UART, CSIO (SPI), I2C, I2S, Smart Card, and USB). The products which are described in this data sheet are placed into TYPE3-M0+ product categories in "FM0+ Family Peripheral Manual". Features 32-bit ARM Cortex-M0+ Core - Processor version: r0p1 - Maximum operating frequency: 40.8 MHz - Nested Vectored Interrupt Controller (NVIC): 1 NMI (non-maskable interrupt) and 24 peripheral interrupt with 4 selectable interrupt priority levels - 24-bit System timer (Sys Tick): System timer for OS task management Bit Band Operation patible with Cortex-M3 bit band operation. On-Chip Memory - Flash memory  Up to 128 Kbytes  Read cycle: 0 wait-cycle  Security function for code protection - SRAM The on-chip SRAM of this series has one independent SRAM .  Up to 16 Kbytes  4Kbytes: can retain value in Deep standby Mode USB Interface USB interface is posed of Device and Host With Main PLL, USB clock can be generated by multiplication of Main clock. - USB Device  USB 2.0 Full-Speed supported  Max 6 End Point supported - End Point 0 is control transfer - End Point 1, 2 can be selected Bulk-transfer, Interrupt-transfer or Isochronous-transfer - End Point 3 to 5 can select Bulk-transfer or Interrupt-transfer - End Point 1 to 5 prise Double Buffer - The size of each End Point is according to the follows - End Point 0, 2 to 5 : 64 bytes - End Point 1 : 256 bytes - USB host  USB 2.0 Full/Low-Speed supported  Bulk-transfer, Interrupt-transfer and Isochronous-transfer support  USB Device connected/disconnected automatically detect  IN/OUT token handshake packet automatically  Max 256-byte packet-length...