CCG5C Datasheet | Cypress

Description EZ-PD™ CCG5C is a one-port USB Type-C controller that plies with the latest USB Type-C and Power Delivery (PD) specifications. CCG5C provides a plete USB Type-C and USB PD port control solution for PCs and notebooks. CCG5C includes a 32-bit, 48-MHz Arm® Cortex®-M0 processor with 128-KB flash and integrates a plete Type-C Transceiver including the Type-C termination resistors Rp, Rd, and dead battery Rd termination. CCG5C is available in a 40-pin QFN package. Applications - PCs and notebooks - Thunderbolt, Non-Thunderbolt hosts and devices/docks Features USB-PD - Supports latest USB PD 3.0 Specification - Fast Role Swap (FRS) - Extended data messaging Type-C - Integrated current sources for DFP[1] role (Rp) - Default current at 500 m A/900 m A - 1.5 A - 3A - Integrated Rd resistor for UFP[2] role - Integrated VCONN FETs to power EMCA cables - Integrated dead battery termination - Integrated high-voltage protection on CC and SBU pins to protect against accidental shorts to the VBUS pin on the Type-C connector Legacy Charging - BCv1.2 (source and sink) - Apple charging (source only) Protection - Configurable hardware controlled VBUS - Overvoltage protection (OVP) - Undervoltage protection (UVP) - Overcurrent protection (OCP) - Overcurrent protection (OCP) for VCONN - High-voltage VBUS short protection for SBU & CC pins Mux - Integrated USB2.0 analog mux for USB 2.0 HS data and UART data - Integrated SBU analog mux for alternate modes (Displayport and Thunderbolt) - Integrated high-voltage LDO operational up to 21.5 V for dead battery mode operation - VBUS high-side Current Sense Amplifier capable of measuring current across 10-mΩ resistance PFET Gate Drivers - Gate Drivers tolerant to 24 V to drive external VBUS PFET on the consumer and provider path - Slew Rate Control 32-bit MCU...