CYUSB3016 Datasheet | Cypress

Features - Universal Serial Bus (USB) integration - USB 3.2, Gen 1 and USB 2.0 peripherals pliant with USB 3.2 Specification Revision 1.0 - 5-Gbps Super Speed PHY pliant with USB 3.2 Gen 1 - Three physical endpoints - Supports UVC, UAC, and USB vendor class protocol - General Configurable Interface - Support up to 100 MHz - 8-, 16-, 24-, and 32-bit data bus - Supports Slave FIFO, parallel camera interface - 32-bit CPU - ARM926EJ core with 200-MHz operation - 512-KB embedded SRAM - Additional connectivity to the following peripherals - SPI boot flash - I2C slaves at 100 k Hz / 400 k Hz / 1 MHz - Selectable clock input frequencies - 19.2, 26, 38.4, and 52 MHz - 19.2-MHz crystal input support - Ultra low-power in core power-down mode - Less than 60 µA with VBATT on and 20 µA with VBATT off - Independent power domains for core and I/O - Core operation at 1.2 V - SPI operation at 1.8 V to 3.3 V - I2C operation at 1.2 V to 3.3 V - Package options - 121-ball, 10-mm  10-mm, 0.8-mm pitch Pb-free ball grid array (BGA) - See Table 16 for details on SX3 variants - EZ-USB™ SX3 configuration utility for configuration of SX3 - Works on Windows, mac OS, Linux - Example configurations for image sensor, HDMI receiver, and data applications - Supports programming of SX3 and configure the FPGA - Supports merging of FPGA configuration with SX3 configuration and store in a single SPI flash - SX3 Development Kit available for rapid prototyping - Third party HDMI to USB3 capture card kit available from Cypress design partner Applications - USB Web CAMs - Document cameras - Video conference systems - USB to Low-voltage Differential Signaling (LVDS) camera interface...