Datasheet4U Logo Datasheet4U.com

S25FL064L - 64-Mbit (8-Mbyte) 3.0V FL-L SPI Flash Memory

General Description

The Cypress FL-L Family devices are Flash Non-volatile Memory products using: Floating Gate technology

The FL-L family connects to a host system via a Serial Peripheral Interface (SPI).

Key Features

  • a Page Programming Buffer that allows up to 256-bytes to be programmed in one operation and provides individual 4 KB sector, 32 KB half block sector, 64 KB block sector, or entire chip erase. By using FL-L family devices at the higher clock rates supported, with Quad commands, the instruction read transfer rate can match or e.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
S25FL064L 64Mb (8MB) FL-L Flash Memory Infineon
S25FL064A Flash Memory SPANSION
S25FL064P 64-Mbit CMOS 3.0 Volt Flash Memory SPANSION
S25FL001D (S25FL001D / S25FL002D) Flash Memory SPANSION
S25FL002D (S25FL001D / S25FL002D) Flash Memory SPANSION

Other Datasheets by Cypress (now Infineon)

Part Number Description
S25FL064P 64-Mbit 3.0 V SPI Flash Memory
S25FL032P 32-Mbit 3.0 V Flash Memory
S25FL128L 3.0V FL-L Flash Memory
S25FL128S 3.0V SPI Flash Memory
S25FL216K 16-Mbit 3.0 V Serial Flash Memory

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
S25FL064L 64-Mbit (8-Mbyte) 3.0 V FL-L SPI Flash Memory General Description The Cypress FL-L Family devices are Flash Non-volatile Memory products using:  Floating Gate technology  65-nm process lithography The FL-L family connects to a host system via a Serial Peripheral Interface (SPI). Traditional SPI single bit serial input and output (Single I/O or SIO) is supported as well as optional two bit (Dual I/O or DIO) and four bit wide Quad I/O (QIO), and Quad Peripheral Interface (QPI) commands. In addition, there are Double Data Rate (DDR) read commands for QIO and QPI that transfer address and read data on both edges of the clock.