Datasheet4U Logo Datasheet4U.com

AP22804 - SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH

Datasheet Summary

Description

The AP22804/AP22814 is a single channel current-limited integrated high-side power switch optimized for Universal Serial Bus (USB) and other hot-swap applications.

The family of devices complies with USB standards and is available with both polarities of Enable input.

Features

  • Input Voltage Range: 2.7V to 5.5V.
  • 50mΩ On-resistance.
  • Built-in Soft-start with 0.6ms Typical Rise Time.
  • Fault Report (FLG) with Blanking Time (6ms Typ).
  • ESD Protection: 2kV HBM, 200V MM.
  • Active Low (B) or Active High (A) Enable.
  • Protection.
  • Over Current with Auto Recovery.
  • Short Circuit with Auto Recovery.
  • Over Temperature with Auto Recovery.
  • Output Reverse Current / Voltage Protection.
  • Thermally Efficient Low Profile Package.
  • To.

📥 Download Datasheet

Datasheet preview – AP22804

Datasheet Details

Part number AP22804
Manufacturer DIODES
File Size 912.43 KB
Description SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH
Datasheet download datasheet AP22804 Datasheet
Additional preview pages of the AP22804 datasheet.

📁 Similar Datasheet

  • AP2201 - RF ULDO REGULATOR (BCD Semiconductor)
  • AP2201 - PFM Control Step-Up Switching Regulator (Chipown)
  • AP2202 - RF ULDO REGULATOR (BCD Semiconductor)
  • AP2203 - RF ULDO REGULATOR (BCD Semiconductor)
  • AP2204 - WIDE INPUT VOLTAGE RANGE 150mA ULDO REGULATOR (BCD Semiconductor)
  • AP2210 - RF ULDO REGULATOR (BCD Semiconductor)
  • AP2213 - LOW NOISE LDO REGULATOR (BCD Semiconductor)
  • AP2218 - LOW DROPOUT LINEAR REGULATOR (BCD Semiconductor)
  • AP22N13GH-HF - N-CHANNEL ENHANCEMENT MODE POWER MOSFET (Advanced Power Electronics)
  • AP22T03GH-HF - N-CHANNEL ENHANCEMENT MODE POWER MOSFET (Advanced Power Electronics)
Other Datasheets by Diodes
  • AP2280 - Single Channel Slew Rate Controlled Load Switch
  • AP22800 - 5V SINGLE CHANNEL PROGRAMMABLE LOAD SWITCH
  • AP22802 - SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH
  • AP2281 - Single Slew Rate Controlled Load Switch
  • AP22811 - SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH
  • AP22814 - SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH
  • AP22815 - SINGLE CHANNEL POWER DISTRIBUTION SWITCH
  • AP22816 - 1.0A/1.5A/2.0A SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH

Full PDF Text Transcription

Click to expand full text
NEW PRODUCT AP22804 / AP22814 SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH Description The AP22804/AP22814 is a single channel current-limited integrated high-side power switch optimized for Universal Serial Bus (USB) and other hot-swap applications. The family of devices complies with USB standards and is available with both polarities of Enable input. The device has fast short-circuit response time for improved overall system robustness, and has an integrated output discharge function to ensure completely controlled discharging of the output voltage capacitor.
Published: |