AP3983R Datasheet | Diodes Incorporated

Description Pin Assignments The AP3983R is a power switcher for power supplies with better conversion efficiency, better voltage & current accuracy, and improved protection functions. Typical applications include chargers and adapters. The AP3983R with built-in MOSFET, regulates the output voltage and current in the primary side by piecewise Pulse Frequency Modulation (p-PFM) in discontinuous conduction mode (DCM). The system operating frequency reduces linearly from heavy load to light load in each interval of the p-PFM, and enters constant current mode when the load current equals to the maximum system output current. The AP3983R provides accurate constant voltage (CV), constant current (CC) and outstanding dynamic performance without requiring an opto-coupler. It also eliminates the need for loop pensation circuitry while maintaining stability. The AP3983R has a built-in fixed cable voltage drop pensation of 8% and adjustable line-voltage pensation. The AP3983R achieves excellent regulation and high average efficiency, less than 2s startup time for 75m W standby power solution. When the AP3983R is adopted with APR3415, good undershoot performances can be achieved. The AP3983R is packaged in SO-7. Applications (Top View) CPC 1 FB 2 VCC 3 CS 4 7 GND 6D 5D SO-7 (M Package) For AP3983R Features - Built-in N Channel MOSFET with 700 BVDSS - Less than 75m W Standby Power Consumption - Meet Efficiency Requirement of COC Trier 2 - Valley Turn-on to Reduce Switching Loss and Improve EMI - Piecewise Frequency Reduction to Enhance Conversion Efficiency and Suppress Audio Noise - Overvoltage Protection (OVP) - Over-Temperature Protection (OTP) - Short Circuit Protection (SCP) with Hiccup Operating Frequency Jitter Function for Conductive EMI Suppression - Totally Lead-Free & Fully Ro HS pliant (Notes 1 & 2) - Halogen and Antimony Free. “Green” Device (Note 3) - Adapters/Chargers - Standby and Auxiliary Power Supplies Notes: 1. No purposely added lead. Fully EU...