Datasheet4U Logo Datasheet4U.com

DPS1035 - 24V/3.5A 1-CH POWER SWITCH W/ REVERSE-VOLTAGE PROTECTION

General Description

The DPS1035 is part of a family of power switches optimized for the USB Type-CTM and other hot-swap applications.

Through the analog interface, exception status is reported and functions like voltage limiting and output voltage ramp-up rate can be programmed.

Key Features

  • Wide Operating Voltage Range: 4.5V to 24V.
  • 1-Channel Power Switch with Built-In Fault Detection and Recovery Mechanisms like Input Under-Voltage Lockout, Reverse-Voltage & Current Blocking, Thermal Shutdown and Input Over-Voltage Protection.
  • RDS(ON) of Embedded Power MOSFET at 30mΩ.
  • Adjustable DV/DT Control at Start-Up.
  • Manual Discharge ON/OFF Control for IN and OUT Ports.
  • Fault Reporting (FAULTB) with Blanking Time at 7ms Typical.
  • Totally Lead-Free & Fu.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DPS11-018-05 DC/DC converters DCDC
DPS11-045-05 DC/DC converters DCDC
DPS12-007-05 DC/DC converters DCDC
DPS12-020-05 DC/DC converters DCDC
DPS128C32BV3 512kx8 High Speed CMOS SRAM Dense-Pac Microsystems

Other Datasheets by Diodes Incorporated

Part Number Description
DPS1113 5V/3A 1-CH POWER SWITCH
DPS1133 24V/3A 1-CH POWER SWITCH
DPS1135 24V/5A 1-CH POWER SWITCH

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NEW PRODUCT DPS1035 24V/3.5A 1-CH POWER SWITCH W/ REVERSE-VOLTAGE PROTECTION Description The DPS1035 is part of a family of power switches optimized for the USB Type-CTM and other hot-swap applications. Through the analog interface, exception status is reported and functions like voltage limiting and output voltage ramp-up rate can be programmed. This device is designed to operate between 4.5V and 24V. Its built-in fault-handling mechanism includes reverse voltage and current blocking, input over-voltage protection, and thermal shutdown. In addition, the ramp-up time of the output voltage can be adjusted to minimize in-rush current and to ensure system stability.