DIM375WKS06-S000 Datasheet | Dynex Semiconductor

FEATURES KEY PARAMETERS VCES VCE(sat)- (typ) IC IC(PK) (max) (max) 600V 2.1V 375A 750A Low Forward Voltage Drop Isolated Copper Baseplate APPLICATIONS Choppers Motor Controllers - (measured at the power busbars and not the auxiliary terminals) The Powerline range of modules includes half bridge, chopper, bi-directional, dual and single switch configurations covering voltages from 600V to 3300V and currents up to 3600A. The DIM375WKS06-S000 is a 600V n channel enhancement mode, insulated gate bipolar transistor (IGBT) chopper module configured with the upper arm of the bridge controlled. The module is suitable for a variety of medium voltage applications in motor drives and power conversion. .. 1(K,E) 2(A) 3(C1) 4(G1) 5(E1) The IGBT has a wide reverse bias safe operating area (RBSOA) for ultimate reliability in demanding applications. These modules incorporate electrically isolated base plates and low inductance construction enabling circuit designers to optimise circuit layouts and utilise earthed heat sinks for safety. Typical applications include dc motor drives, ac pwm drivesand ups systems.. Fig. 1 Chopper circuit diagram ORDERING INFORMATION Order as: DIM375WKS06-S000 Note: When ordering, use plete part number. Outline type code: W (See package details for further information) Fig. 2 Electrical connections - (not to scale) Caution: This device is sensitive to electrostatic discharge. Users should follow ESD handling procedures. 1/8 .dynexsemi. ABSOLUTE MAXIMUM RATINGS - PER ARM Stresses above those listed under 'Absolute Maximum Ratings' may cause permanent damage to the device. In extreme conditions, as with all semiconductors, this may include potentially hazardous rupture of the package. Appropriate safety precautions should always be followed. Exposure to Absolute Maximum Ratings may affect device reliability. Tcase = 25˚C unless stated otherwise Symbol VCES VGES IC IC(PK) Pmax I2t Visol Parameter Collector-emitter...