E13D8 Datasheet | ECLIPTEK

.. E13D8 Series - Ro HS pliant (Pb-Free) - LVPECL Output Oscillators - 3.3V Supply Voltage - Ceramic 6-pad SMD Package - Stability to ±25ppm - Tri-State Output - plementary Output - Available on Tape and Reel - Wide Range of Available Frequencies 2.0 7.0 5.0 OSCILLATOR ELECTRICAL SPECIFICATIONS Nominal Frequency Operating Temperature Range Storage Temperature Range Supply Voltage (VCC) Input Current Frequency Tolerance / Stability 75MHz, 77.76MHz, 80MHz, 100MHz, 106.25MHz, 125MHz, 150MHz, 155.52MHz, 156.25MHz, 159.375MHz, 187.5MHz, 212.5MHz, 250MHz, 311.04MHz, 312.5MHz 0°C to +70°C, or -40°C to +85°C -55°C to 125°C 3.3VDC ±5% With Load 75m A Maximum Inclusive of All Conditions: Calibration Tolerance at 25°C, ±50ppm Maximum, or ±25ppm Maximum Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, 1st Year Aging at 25°C, Shock, and Vibration VCC -1.4VDC Minimum, VCC -1.2VDC Typical, VCC -0.9VDC Maximum VCC -1.7VDC Minimum, VCC -1.85VDC Typical, VCC -2.0VDC Maximum 600m Vdc Minimum, 800m Vdc Typical, 1000m Vdc Maximum 300p Sec Typical, 600p Sec Maximum 50 ±5(%) 50 Ohms into VCC-2.0VDC Tri-State and plementary Output Enables Output Enables Output Disables Output: High Impedance 600µA Maximum 10 m Seconds Maximum 0.7p Sec Typical, 1 p Sec Maximum -60d Bc/Hz at 10Hz Offset -90d Bc/Hz at 100Hz Offset -115d Bc/Hz at 1k Hz Offset -129d Bc/Hz at 10k Hz Offset -130d Bc/Hz at 100k Hz Offset -131d Bc/Hz at 1MHz Offset -148d Bc/Hz at 10MHz Offset VOLTAGE CLASS REV.DATE Output Voltage Logic High (VOH) Output Voltage Logic Low (VOL) Peak to Peak Output Voltage Swing Rise Time / Fall Time Duty Cycle Load Drive Capability Logic Control / Additional Output Tri-State Input Voltage 20% to 80% of waveform at 50% of waveform Standby Current Start Up Time RMS Phase Jitter Typical Phase Noise VIH of 70% of VCC Minimum No Connection VIL of 30% of VCC Maximum Disabled Output, High Impedance, Without Load FJ = 12k Hz to...