Datasheet4U Logo Datasheet4U.com

EM9201 - Low power 2.4 GHz Transceiver

General Description

EM9201 is a low-voltage 2.4GHz transceiver IC with built-in link-layer logic suitable for proprietary wireless links in the 2.400 … 2.4835 GHz ISM band.

Key Features

  • a radio core with a low-IF architecture and GFSK modulation scheme being compatible with popular low energy RF standards. Control of the link-layer logic is possible though a standard SPI interface. To achieve this, an external host-controller MCU is required. EM9201 includes a special mode called bridge, which allows direct control of the RF interface and which can be used to emulated any proprietary protocol, employing an external FPGA, EM9201 can operate from a 3 V battery or any other source.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
EM92547A CALLER ID FSK DECODER ELAN Microelectronics Corp
EM92547B CALLER ID FSK DECODER ELAN Microelectronics Corp
EM92547D CALLER ID FSK DECODER ELAN Microelectronics Corp
EM92600A DUAL PLL FOR 46/49 MHZ CORDLESS PHONE ELAN Microelectronics Corp
EM92601A DUAL PLL FOR 46/49 MHZ CORDLESS PHONE ELAN Microelectronics Corp

Other Datasheets by EM Microelectronic (Swatch Group)

Part Number Description
EM9202 Worlds First Fully Integrated Single-Cell Battery 2.4GHz Transceiver
EM9203 2.4GHz GFSK Transceiver
EM9209 FSK Transceiver
EM9301 Single-Cell Battery Bluetooth Low-Energy Controller
EM9304 Bluetooth5.0 low-energy COMPANION-or-SOC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DATASHEET Ɩ EM9201 Fully integrated, low power 2.4 GHz Transceiver Description EM9201 is a low-voltage 2.4GHz transceiver IC with built-in link-layer logic suitable for proprietary wireless links in the 2.400 … 2.4835 GHz ISM band. EM9201 features a radio core with a low-IF architecture and GFSK modulation scheme being compatible with popular low energy RF standards. Control of the link-layer logic is possible though a standard SPI interface. To achieve this, an external host-controller MCU is required. EM9201 includes a special mode called bridge, which allows direct control of the RF interface and which can be used to emulated any proprietary protocol, employing an external FPGA, EM9201 can operate from a 3 V battery or any other source of power such as any external LDO regulator.