Datasheet4U Logo Datasheet4U.com

EN29LV641L - (EN29LV640U / EN29LV641x) Flash Memory

Download the EN29LV641L datasheet PDF. This datasheet also covers the EN29LV640U variant, as both devices belong to the same (en29lv640u / en29lv641x) flash memory family and are provided as variant models within a single manufacturer datasheet.

General Description

The EN29LV641H/L / EN29LV640U is a 64-Megabit (4,194,304x16), electrically erasable, read/write non-volatile flash memory.

Any word can be programmed typically in 8µs.

This device is entirely command set compatible with the JEDEC single-power-supply Flash standard.

Key Features

  • Single power supply operation - Full voltage range: 2.7 to 3.6 volts for read, erase and program operations.
  • Low power consumption (typical values at 5 MHz) - 9 mA typical active read current - 20 mA typical program/erase current - Less than 1 µA current in standby or automatic sleep mode.
  • Software features:.
  • Sector Group Protection - Provide locking of sectors to prevent program or erase operations within individual sectors - Additionally, temporary Sector.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (EN29LV640U_EON.pdf) that lists specifications for multiple related part numbers.

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com EN29LV641H/L EN29LV640U EN29LV641H/L EN29LV640U 64 Megabit (4096K x 16-bit) Flash Memory, CMOS 3.0 Volt-only Uniform Sector Flash Memory FEATURES • Single power supply operation - Full voltage range: 2.7 to 3.6 volts for read, erase and program operations • Low power consumption (typical values at 5 MHz) - 9 mA typical active read current - 20 mA typical program/erase current - Less than 1 µA current in standby or automatic sleep mode. „ Software features: • Sector Group Protection - Provide locking of sectors to prevent program or erase operations within individual sectors - Additionally, temporary Sector Group Unprotect allows code changes in previously protected sectors.