LP75W-12-C6250 Datasheet | EPtronics

75W LP75W Series DIMMING LED Optimized Drivers 75 Watt - LP75W Series CONSTANT VOLTAGE OR CONSTANT CURRENT LED DRIVER WITH DIMMING Model: LP75W Series Environmental - Drive Mode: Constant Current or Constant Voltage - Technology: PFC Corrected 2-Stage Switch Mode - Output Power: 75W Max. - Input Voltage: 90 to 305VAC, 47- 63Hz - Number of Outputs: One - Output Voltages: 4VDC - 214VDC - Output Currents: 350mA - 6250mA - Optional 0-10V or PWM Positive Dimming 10% ~ 100% Safety and pliance 1. Operating temperature: Tc 90C Maximum. Reference -30 to +65°C ambient 2. Storage temperature range: -40 to +85°C 3. Humidity (non-condensing): 5% - 95%RH 4. Cooling: Convection 5. Vibration Frequency: 5-55Hz/2g, 30 minutes 6. Impact resistance: 1g/s 7. MTBF@ 40OC: 474,000 hours @ Full Load per MIL-217F Notice 2. Electrical Specifications at 25OC 1. UL8750, EN61347, CSA 22.2 safety pliant 2. FCC, 47CFR Part 15 Class B pliant 3. Water resistant and Dust Proof Design: IP66, NEMA6, for Dry, Damp, Wet Locations. 4. pact Miniature, Lightweight Design. 5. Safety Isolation between Primary and Secondary 6. Meets EN61000-3-2 & EN61000-3-3 Class C 7. Protection: output over-voltage, output over-current, output short circuit, auto-recovery. 8. EN614000-4-5: 2kV/4kV 8/20 µsec transient protection. - Input voltage range: 90 to 305VAC - Frequency: 47- 63HZ - Power Factor: > 0.90 at > 75% Load, 120Vac/230Vac/277Vac 50/60Hz - THD%: < 20% at > 60% Load, 120Vac/230Vac/277Vac 50/60Hz - Inrush current: <50A at 25C, 277V, cold start, Max. Load...