DI-8B32 Datasheet | Unknown Manufacturer

FEATURES - Accepts Milliamp Level Signals - High Level Voltage Outputs - 1500Vrms Transformer Isolation - ANSI/IEEE C37.90.1 Transient Protection - Input Protected to 30VAC Continuous - 120d B CMR - 70d B NMR at 60Hz - ±0.05% Accuracy - ±0.02% Linearity - Low Drift with Ambient Temperature - CSA, FM and CE Certifications Pending - Mix and Match Module Types SPECIFICATIONS Input Range Input Resistance Input Protection CMV, Input to Output Transient, Input to Output CMR (50Hz or 60Hz) NMR Accuracy- Nonlinearity Stability Noise Typical at TA = +25ºC and +5V Power 0m A to 20m A or 4m A to 20m A Normal Power Off Continuous Transient <50Ω <50Ω 40VAC ANSI/IEEE C37.90.1 1500Vrms max ANSI/IEEE C37.90.1 120d B 70d B at 60Hz ±0.05% span ±0.02% Span ±25ppm/ºC ±50ppm/ºC 250µVrms 3Hz 150ms 0 to +5V Continuous Short to Ground ANSI/IEEE C37.90.1 +5VDC ±5% 30m A ±25ppm/% 1.11" × 1.65" × 0.40" (28.1mm × 41.9mm × 10.2mm) -40ºC to +85ºC -40ºC to +85ºC 0 to 95% Noncondensing DI-8B modules are an optimal solution for monitoring real-world process signals and providing high level signals to a data acquisition system. Each DI-8B32 module isolates, filters and amplifies a process current input signal and provides an analog .. voltage output. Current to voltage conversion is acplished internal to the module to ensure high accuracy. Signal filtering is acplished with a three-pole filter optimized for time and frequency response which provides 70d B of normal-mode-rejection at 60Hz. One pole of this filter is on the field side of the isolation barrier for anti-aliasing, and the other two are on the system side. A special input circuit on the 8B32 module provides protection against accidental connection of power-line voltages up to 30VAC. Isolation is provided by optical coupling to suppress transmission of mon mode spikes or surges. The module is powered from +5VDC, ±5%. The modules are designed for installation in Class I, Division 2 hazardous locations and have a high level of immunity to...