DI-8B35 Datasheet | Unknown Manufacturer

FEATURES - Interfaces to 100Ω Platinum RTDs - Linearizes RTD Signal - High Level Voltage Outputs - 1500Vrms Transformer Isolation - ANSI/IEEE C37.90.1 Transient Protection - Input Protected to 240VAC Continuous - 120d B CMR - 70d B NMR at 60Hz - Low Drift with Ambient Temperature - CSA, FM and CE Certifications Pending - Mix and Match Module Types SPECIFICATIONS Input Range Limits Input Resistance Typical at TA = +25ºC and +5V Power -200˚C to +850˚C (100Ω Pt) Normal Power Off Overload Continuous¹ Transient 50MΩ 200kΩ 200kΩ 240VAC ANSI/IEEE C37.90.1 0.25m A ±0.001˚C/Ω² 1500Vrms max ANSI/IEEE C37.90.1 120d B 70d B at 60Hz ±0.20˚C ±0.15˚C ±0.20˚C ±0.45˚C ±20ppm/ºC ±50ppm/ºC 250µVrms 3Hz 150ms 0 to +5V Continuous Short to Ground ANSI/IEEE C37.90.1 +5VDC ±5% 30m A ±25ppm/% 1.11" × 1.65" × 0.40" (28.1mm × 41.9mm × 10.2mm) Input Protection Sensor Excitation Current Lead Resistance Effect CMV, Input to Output Transient, Input to Output CMR (50Hz or 60Hz) NMR Accuracy³ DI-8B modules are an optimal solution for monitoring real-world process signals and providing high level signals to a data acquisition system. Each DI-8B35 module isolates, filters, amplifies, and linearizes a .. single channel of temperature input from an RTD and provides an analog voltage output. RTD excitation is provided from the module using a precision current source. Excitation current does not flow in the input signal leads, which allows RTD measurements to be made independent of lead resistance. The exciation currents are small (0.25m A) which minimizes self-heating of the RTD. Signal filtering is acplished with a three-pole filter optimized for time and frequency response which provides 70d B of normal-mode-rejection at 60Hz. One pole of this filter is on the field side of the isolation barrier for anti-aliasing, and the other two are on the system side. A special input circuit on the DI-8B35 module provides protection against accidental connection of power-line voltages up to 240VAC. Clamp...