HM69 Datasheet | Unknown Manufacturer

Electrical / Environmental  High Current Low Profile Surface Mount Inductors S H o r R t n a li fo p ls ‘LF’ M ode - - - - Operating Temperature Range Temperature Rise, Maximum Ambient Temperature, Maximum Insulation System -40°C to +125°C 40°C 80°C Class F, 155°C Specifications Inductance 100k Hz, 0.1V @ 0 Adc @ Irated (n H±20%) (n H) Typ. Min. Typ. 25 50 70 100 100 150 100 200 100 150 200 300 200 300 18 28 50 60 72 96 64 140 69 104 144 200 150 216 25 36 67 75 95 120 80 175 87 130 180 250 175 285 Part Number HM69-10R025 HM69-20R050 HM69-30R070 HM69-40R10 HM69-50R10 HM69-50R15 HM69-55R10 HM69-55R20 HM69-60R10 HM69-60R15 HM69-60R20 HM69-70R30 HM69-75R20 HM69-80R30 Notes: DCR (mΩ) Typ. 0.27 0.20 0.40 0.31 0.40 0.40 0.45 0.45 0.42 0.42 0.42 0.17 0.40 0.17 (1) Max. 0.33 0.24 0.48 0.39 0.48 0.48 0.56 0.56 0.50 0.50 0.50 0.20 0.50 0.25 Irated @ 25°C (Adc) 42 70 46 28 29 18 45 21 68 48 31 37 20 40 (2) Heating (3) Current (A) 22 35 25 25 24 24 25 25 31 31 31 70 40 76 Core Loss Factor K1 3.847E-14 1.074E-13 1.074E-13 7.124E-14 8.733E-14 8.733E-14 1.337E-13 1.337E-13 2.311E-13 2.311E-13 2.311E-13 6.784E-13 3.559E-13 9.107E-13 (4) K2 59.444 50.117 70.164 156.891 127.990 191.986 96.541 160.902 52.336 78.503 104.671 98.921 134.203 72.674 (1) DC resistance is measured at 25°C. (2) The rated current (Irated) is the current at which the inductance will be decreased by 20% from its initial (zero DC) value. (3) The heating current is the DC current, which causes the ponent temperature to increase by approximately 40°C. This current is determined by soldering the ponent on a typical application PCB, and then apply the device for 30 minutes. (4) Core Loss approximation is based on published core data: Core Loss = K1 - (f)1.77 - (K2∆I)2.21 Where: core loss in watt f = switching frequency in k Hz K1 and K2 = core loss factor ∆I = delta I across the ponent in Amp. K2∆I = one half of the peak to peak flux density across the ponent in Gauss Packaging Standard: Embossed...