HMJ5 Datasheet | Unknown Manufacturer

Features - +35 d Bm IIP3 - No external matching element - - - - - - Product Description The HMJ5 is a high dynamic range, Ga As FET mixer. This active FET mixer realizes a typical third order intercept point of +35 d Bm at an LO drive level of +17 d Bm. The HMJ5 es in a low cost, J-Lead package. Typical applications include frequency up/down conversion, modulation and demodulation for receivers and transmitters used in munications systems. Functional Diagram 22 21 2019 18171615 1413 12 Required RF 40-1000 MHz LO 30-900 MHz IF 5-250 MHz +17 d Bm LO Drive Level +3V at 35 m A DC Power Supply Low Cost Surface Mount J-Lead Package 1 2 3 4 5 6 7 8 9 10 11 d Bm 7 1 + Specifications Parameter Frequency Range: RF LO IF SSB Conversion Loss SSB Noise Figure Isolation: LO to RF LO to IF IIP3 Return Loss: RF Port LO Port IF Port Input P1d B LO Drive Level DC Current at +3V Bias Units MHz MHz MHz d B d B d B d B d Bm d B d B d B d Bm d Bm m A Minimum 40 30 5 D- e E T DA O Driv P U L - Function Pin No. Function Pin No. Ground 1 Ground 12 IF 2 LO 13 Ground 3-9 Ground 14-20 +3V DC 10 RF 21 Ground 11 Ground 22 Typical Maximum 1000 900 250 9.0 Condition 7.5 9.5 20 24 31 28 30 35 11.7 6.0 10.9 23 17 35 RF = 900 MHz (0 d Bm) Notes: 1. RF = 905 MHz (-10 d Bm) LO 900 (+17 d B) IF = 5 at 25°C. 2. Measured in a 50-ohm system with nominal LO drive in a downconverter application only, unless otherwise specified. 3. LO frequency must be separated from IF frequency by a minimum of 2 MHz (i.e., |FLO - FIF| ≥ 2 MHz). Absolute Maximum Ratings Parameter Operating Case Temperature Storage Temperature Maximum Input Power Rating -40 to +85°C -65 to +100°C +25 d Bm Ordering Information Part No. HMJ5 HMJ5-PCB Description High Dynamic Range FET Mixer (Available in tape and reel) Fully Assembled Application Circuit 1. Operation of this device above any of these parameters may cause permanent damage. 2. Total sum of LO port and RF port power should not exceed 25 d Bm. WJ munications, Inc. - Phone:...