SP8718 - 520MHz LOW CURRENT TWO-MODULUS DIVIDERS

Key Features

DC to 520MHz Operation -40°C to +85°C Temperature Range Control Inputs and Outputs are CMOS Compatible Figure : 1 Pin connections - top view DP8, MP8 QUICK.

SP8718 520mhz low current two-modulus dividers by Unknown Manufacturer - Datasheet Preview

Datasheet Details

Part number	SP8718
Manufacturer	Unknown Manufacturer
File Size	73.87 KB
Description	520MHz LOW CURRENT TWO-MODULUS DIVIDERS
Datasheet	SP8718 Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
SP8712B	Asynchronous Emitter Coupled Logic Counter	Plessey
SP8713	1100MHz Very Low Current Three Modulus Divider	Mitel Networks
SP8713IGMPAC	1100MHz Very Low Current Three Modulus Divider	Mitel Networks
SP8713IGMPAS	1100MHz Very Low Current Three Modulus Divider	Mitel Networks
SP8714	2100MHz Very Low Current Multi-Modulus Divider	Mitel Networks

Other Datasheets by Unknown Manufacturer

Part Number	Description
SP8716	520MHz LOW CURRENT TWO-MODULUS DIVIDERS
SP8719	520MHz LOW CURRENT TWO-MODULUS DIVIDERS
SP8704	950MHz VERY LOW CURRENT MULTI-MODULUS DIVIDER
SP8792	WITH ON-CHIP VOLTAGE REGULATOR
SP8793	WITH ON-CHIP VOLTAGE REGULATOR

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

THIS DOCUMENT IS FOR MAINTENANCE PURPOSES ONLY AND IS NOT RECOMMENDED FOR NEW DESIGNS DS 3292 -1 SP8716/8/9 520MHz LOW CURRENT TWO-MODULUS DIVIDERS SP8716 ÷ 40/41, SP8718 ÷ 64/65, SP8719 ÷ 80/81 are 50mW programmable dividers with a maximum specified operating frequency of 520MHz over the temperature range -40 °C to + 85 °C. The signal (clock) inputs are biased internally and require to be capacitor coupled. The output stage is of an unusual low power design featuring dynamic pull-up, and optimised for driving CMOS. The 0 to 1 output edge should be used to give the best loop delay performance.