Datasheet4U Logo Datasheet4U.com

AAP2408 - Step-Down Converter

Description

The AAP2408 is a constant frequency, current mode, PWM step-down converter.

The device integrates a main switch and a synchronous rectifier for high efficiency.

Features

  • z High Efficiency up to 96% z 1.5MHz Constant Switching Frequency z 800mA Available Load Current z 270µA Typical Quiescent Current z 2.5V to 5.5V Input Voltage Range z Adjustable Output Voltage as Low as 0.6V z 100% Duty Cycle Low Dropout Operation z No Schottky Diode Required z Short Circuit and Thermal Protection z Excellent Line and Load Transient Response z 1µA Shutdown Current z Soft Start Function z Over Voltage Protection z Available in 1.2V,1.8V,3.3V and adjustable voltag.

📥 Download Datasheet

Datasheet preview – AAP2408

Datasheet Details

Part number AAP2408
Manufacturer EUTECH
File Size 724.86 KB
Description Step-Down Converter
Datasheet download datasheet AAP2408 Datasheet
Additional preview pages of the AAP2408 datasheet.

📁 Similar Datasheet

  • AAP200A - ECM Microphone Pre-Amplifier (ASIC)
  • AAP200B - ECM Microphone Pre-Amplifier (ASIC)
  • AAP200C - ECM Microphone Pre-Amplifier (ASIC)
  • AAP200D - ECM Microphone Pre-Amplifier (ASIC)
  • AAP120 - DIODA UNIWERSALNA (ETC)
  • AAP152 - DIODA UNIWERSALNA (ETC)
  • AAP153 - DIODA UNIWERSALNA (ETC)
  • AAP6011A - Synchronous Buck Converter (SG Micro)
Other Datasheets by EUTECH
  • AAP2967 - 300mA Low-Noise Low-Dropout Linear Regulator

Full PDF Text Transcription

Click to expand full text
AAP2408 1.5MHz, 800mA Synchronous Step-Down Converter with Soft Start DESCRIPTION The AAP2408 is a constant frequency, current mode, PWM step-down converter. The device integrates a main switch and a synchronous rectifier for high efficiency. The 2.5V to 5.5V input voltage range makes the AAP2408 ideal for powering portable equipment that runs from a single cell Lithium-Ion (Li+) battery or 3-cell NiMH/ NiCd batteries. The output voltage can be regulated as low as 0.6V. The AAP2408 supports up to 800mA load current and can also run at 100% duty cycle for low dropout applications, extending battery life in portable systems. Switching frequency is internally set at 1.5MHz, allowing the use of small surface mount inductors and capacitors.
Published: |