EL5285C Datasheet | Elantec Semiconductor

Features - - - - - - - - - - 4ns typ. propagation delay 5V to 12V input supply +2.7V to +5V output supply True-to-ground input Rail-to-rail outputs Separate analog and digital supplies Active low latch Single available (EL5185C) Quad available (EL5485C & EL5486C) Pin-patible 6ns family available (EL5x81C, EL5283C & EL5482C) General Description The EL5285C parator is designed for operation in single supply and dual supply applications with 5V to 12V between VS+ and VS-. For single supplies, the inputs can operate from 0.1V below ground for use in ground sensing applications. The output side of the parators can be supplied from a single supply of 2.7V to 5V. The rail-to-rail output swing enables direct connection of the parator to both CMOS and TTL logic circuits. The latch input of the EL5285C can be used to hold the parator output value by applying a low logic level to the pin. The EL5285C features two separate parators The EL5285C is available in the 14-pin SO package and is specified for operation over the full -40°C to +85°C temperature range. Also available are a single (EL5185C) and quad versions (EL5485C and EL5486C.) Applications - - - - - - Threshold detection High speed sampling circuits High speed triggers Line receivers PWM circuits High speed V/F converters Pin Configurations Ordering Information Part No. EL5285CS EL5285CS-T7 EL5285CS-T13 Package 14-Pin SOIC 14-Pin SOIC 14-Pin SOIC Tape & Reel 7” 13” Outline # MDP0027 MDP0027 MDP0027 VS+ 1 INA+ 2 INA- 3 NC 4 INB- 5 INB+ 6 VS- 7 EL5285C (14-Pin SO) + + - 14 VSD 13 OUTA 12 LATCHA 11 NC 10 LATCHB 9 OUTB 8 GND September 7, 2001 Note: All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a “controlled document”. Current revisions, if any, to these specifications are maintained at the factory and are available upon your request. We remend checking the revision level before finalization of...