EBS12UC6APS Datasheet | Elpida Memory

DATA SHEET 128MB SDRAM S.O.DIMM EBS12UC6APS (16M words × 64 bits, 1 bank) Description The EBS12UC6APS is 16M words × 64 bits, 1 bank Synchronous Dynamic RAM Small Outline Dual In-line Memory Module (S.O.DIMM), mounted 4 pieces of 256M bits SDRAM (EDS2516APTA) sealed in TSOP package. This module provides high density and large quantities of memory in a small space without utilizing the surface mounting technology. Decoupling capacitors are mounted on power supply line for noise reduction. Features - Fully patible with 8 bytes S.O.DIMM: JEDEC standard outline - 144-pin socket type small outline dual in line memory module (S.O.DIMM)  PCB height: 31.75mm (1.25inch )  Lead pitch: 0.80mm - 3.3V power supply - Clock frequency: 100MHz/133MHz (max.) - LVTTL interface - Data bus width: × 64 non-ECC - Single pulsed /RAS - 4 Banks can operates simultaneously and independently - Burst read/write operation and burst read/single write operation capability - Programmable burst length (BL): 1, 2, 4, 8, Full page - 2 variations of burst sequence  Sequential  Interleave - Programmable /CAS latency (CL): 2, 3 - Byte control by DQMB - Refresh cycles: 8192 refresh cycles/64ms - 2 variations of refresh  Auto refresh  Self refresh Document No. E0224E20 (Ver. 2.0) Date Published November 2001 (K) Japan URL: http://.elpida. Elpida Memory, Inc. 2001 Ordering Information Part number EBS12UC6APS-7A EBS12UC6APS-75 - EBS12UC6APS-80 EBS12UC6APS-7AL EBS12UC6APS-75L- EBS12UC6APS-80L Clock frequency MHz (max.) 133 133 100 133 133 100 /CAS latency Package 2, 3 3 2, 3 2, 3 3 2, 3 144-pin S.O.DIMM Contact pad Gold Mounted devices EDS2516APTA Note: 100MHz operation at /CAS latency = 2. Pin Configurations Front Side 1pin...