EBS51RC4ACFC Datasheet | Elpida Memory

DATA SHEET 512MB Registered SDRAM DIMM EBS51RC4ACFC (64M words × 72 bits, 1 bank) Description The EBS51RC4ACFC is 64M words × 72 bits, 1 bank Synchronous Dynamic RAM Registered Module, mounted 18 pieces of 256M bits SDRAM sealed in TSOP package. This module provides high density and large quantities of memory in a small space without utilizing the surface mounting technology. Decoupling capacitors are mounted on power supply line for noise reduction. Features - Fully patible with 8 bytes DIMM: JEDEC standard outline - 168-pin socket type dual in line memory module (DIMM)  PCB height: 30.48mm (1.20inch)  Lead pitch: 1.27mm - 3.3V power supply - Clock frequency: 133MHz (max.) - LVTTL interface - Data bus width: × 72 ECC - Single pulsed /RAS - 4 Banks can operates simultaneously and independently - Burst read/write operation and burst read/single write operation capability - Programmable burst length (BL): 1, 2, 4, 8 - 2 variations of burst sequence  Sequential  Interleave - Programmable /CAS latency (CL): 2, 3 - Registered inputs with one clock delay - Byte control by DQMB - Refresh cycles: 8192 refresh cycles/64ms - 2 variations of refresh  Auto refresh  Self refresh - 1 piece of PLL clock driver, 3 pieces of register driver and 1 piece of serial EEPROM (2k bits) for Presence Detect (SPD) on PCB. Document No. E0108E30 (Ver. 3.0) Date Published May 2002 (K) Japan URL: http://.elpida. Elpida Memory, Inc. 2001-2002 Ordering Information Part number EBS51RC4ACFC-7A EBS51RC4ACFC-75- Clock frequency MHz (max.) 133 133 /CAS latency 2, 3 3 Package 168-pin DIMM Contact pad Gold Mounted devices EDS2504ACTA Note: 100MHz operation at /CAS latency = 2. Pin Configurations 1 pin 10 pin 11 pin 40 pin 41 pin 84 pin 85 pin 94 pin 95 pin 124 pin 125...