NTQ123 Datasheet | Emerson

70-120 Watts NTQ123 Series Total Power: 70-120 Watts Input Voltage: 85-264 VAC # of Outputs: Quad Electrical Specs Input Input range Frequency Inrush current Efficiency EMI filter 85-264 VAC 47-63 Hz 38 A max., cold start @ 25°C 65% typical at full load FCC Class B conducted and radiated, CISPR 22 Class B conducted and radiated, EN55022 Class B conducted and radiated, VDE 0878 PT3 Class B conducted and radiated. 0.99 typical <1 m A @ 50/60 Hz, 264 VAC input Power factor Safety ground leakage current Special Features - - - - - - - - - - Active power factor correction EN61000-3-2 pliance Remote sense on outputs one and two Power fail and remote inhibit Single wire current sharing on outputs one and two Adjustable main outputs Built-in Class B EMI filter Overvoltage protection Overload protection Thermal overload protection Output Maximum power Adjustment range Hold-up time Overload protection 70 W convection, 120 W with 30 CFM forced air ±5% minimum on outputs one and two 20 ms @ 120 W load, 120 VAC input Short circuit protection on all outputs. Case overload protected @ 110-145% above peak rating 3.3 V and 5 V output: 20% to 35% above nominal output TTL logic signal goes high 100-500 msec after 5 V output; it goes low at least 4 msec before loss of regulation Requires an external TTL Signal to inhibit outputs pensates for 0.5 V lead drop minimum, will operate without remote sense connected. Reverse connection protection. Overvoltage protection Logic Control Power failure Remote inhibit Environmental Operating temperature: 0° to 50°C ambient; derate each output at 2.5% per degree from 50° to 70°C Electromagnetic susceptibility: Designed to meet EN61000-4, -2, -3, -4, -5, -6, -8, -11 Level 3 Humidity: Operating; non-condensing 5% to 95% Vibration: Three orthogonal axes, sweep at 1 oct/min, 5 min. dwell at four major resonances 0.7 G peak 5 Hz to 500 Hz, operational Storage temperature: -40° to 85°C Temperature coefficient: ± .04% per °C MTBF...