SIL10E-05S1V5-VJ Datasheet | Emerson

Embedded Power for Business-Critical Continuity SIL10E Series 3.0 Vin - 5.5 Vin Rev.3.4.09_96 SIL10E_05 Series of 4 Total Power: 49.9 Watts Input Voltage: 3.0-5.5 Vdc # of Outputs: Single Electrical Specifications Special Features - - - - - - - - - - - 10 A Current rating Input voltage range: 3 Vdc to 5.5 Vdc Output voltage range: 0.8 Vdc to 3.63 Vdc Ultra high efficiency: 96% @ 5 Vin and 3.3 Vout Extremely low internal power dissipation Minimal thermal design concerns Designed in reliability:  MTBF of 7,000,000 hours per Telcordia SR-332 Ideal solution where board space is at a premium or tighter card pitch is required Industry standard footprint and pin out Available Ro HS pliant 2 year warranty Input Input voltage range: Input current: Input current (max.): Input reflected ripple: Remote ON/OFF: Start-up time: No load 3.0-5.5 Vdc 70 m A 8 A max. @ lo max. and Vout = 3.3 V 65 m A rms (See Note 2) 20 ms Fixed output versions 5 Vin with wide trim 3.3 Vin with wide trim ±10% 0.8 - 3.63 Vdc 0.8 - 2.75 Vdc ±0.4% typ. ±0.2% typ. ±1.0% typ. 0A None 50 m V pk-pk 25 m V rms max. ±0.01%/˚C 50 m V max. deviation 50µs recovery to within ±1.0% 10% Vo pensation Output Voltage adjustability: (See Note 1) Setpoint accuracy: Line regulation: Load regulation: Minimum load: Overshoot/Undershoot: Ripple and noise: Temperature co-efficient: Transient response: Remote sense: Safety - UL/c UL CAN/CSA 22.2 No. 60950-1-03/UL 60950-1, File No. E186249 - TÜV Product Service (EN60950) Certificate No. B 08 05 51485 378 - CB report and certificate to IEC60950, Certificate No. DE3-51686M1 All specifications are typical at nominal input, full load at 25 °C unless otherwise stated. Embedded Power for Business-Critical Continuity Rev.3.4.09_96 SIL10E_05 Series of 4 EMC Characteristics Electrostatic discharge: Conducted immunity: Radiated immunity: EN61000-4-2, IEC801-2 EN61000-4-6 EN61000-4-3 General...