SMT20C2-00SADJJ Datasheet | Emerson

SIL/SMT20C2 Series DC-DC CONVERTERS - - - - - - - C Class Non-isolated 20 A current rating Input voltage range: 4.5-13.8 V Output voltage: 0.59-5.1 V Industry leading value - Cost optimized design Excellent transient response Output enable Output voltage adjustability - Pathway for future upgrades - Supports silicon voltage migration - Resulting in reduced design-in and qual time Current sink capability Ro HS pliant 4.5 Vin to 13.8 V Single Output August 27, 2008 1 NEW Product - - The SIL/SMT20C2 series is a new high density, open frame, non-isolated converter for space sensitive applications. This model has a wide input range (4.5-13.8 Vdc) and offers a wide 0.59-5.1 V output voltage range with 20 A load capability. An external resistor adjusts the output voltage from its pre-set value of 0.59 V to any value up to the 5 V maximum. Typical efficiencies for the models are 93% for the 12 V input version. The series offers remote ON/ OFF and over-current protection as standard. All specifications are typical at nominal input, full load at 25 °C, unless otherwise stated OUTPUT SPECIFICATIONS Output voltage Output setpoint accuracy Line regulation Load regulation Min/max load Overshoot Undershoot Ripple and noise 5 Hz to 20 MHz Transient response At turn-on At turn-off (See Note 1) (See Notes 1, 2) (See Note 5) 0.1% trim resistors Low line to high line Full load to min. load 0.59-5.1 V ±1.0% ±0.2% ±0.5% 0 A/20 A 0.5% max. 100 m V max. 30 m V Vin = 5 V, Vout = 2.5 V 130 m V max. deviation 50 μs recovery within regulation band Coplanarity GENERAL SPECIFICATIONS Efficiency Switching frequency Approvals and standards (pending) Material flammability Weight MTBF 12 V @ 40 °C 100% load Bellcore 332 2 YEAR WARRANTY SPECIFICATIONS Vin=5 V, Vo=2.5 V, lo=20 A Fixed 90% 750 k Hz EN60950 UL/c UL6950 UL94V-0 8.50 g/0.3 oz. 6,721,853 hours 150 μm ENVIRONMENTAL SPECIFICATIONS Thermal performance (See Note 5) Operating ambient, temperature Non-operating 0 °C to +70 °C -40 °C to...