FRM5W621KT Datasheet | Eudyna Devices

FEATURES - - - - - Data rate up to 622Mb/s High Responsibility: typ. 0.85A/W at 1,550nm 30µm active area APD chip with Ga As pre-amplifier High temperature operation up to +85°C Small co-axial package with single mode fiber FRM5W621KT/LT APPLICATIONS - Medium bit rate long haul optical transmission systems at STM-4 (OC-12) DESCRIPTION These APD preamplifiers use an In Ga As APD chip with Ga As IC preamplifier. The KT package is designed for a horizontal PC board mount. The LT package is secured by a vertical flange. Each package is connected with single-mode fiber by Nd: YAG welding. The detector preamplifier is DC coupled and has a low electrical output when the APD is illuminated. .. Edition 1.0 March 1999 FRM5W621KT/LT ABSOLUTE MAXIMUM RATINGS (Tc=25°C) Parameter Storage Temperature Operating Temperature Supply Voltage APD Supply Voltage APD Reverse Current Symbol Tstg Top Vss VR (Note 1) IR (Note 2) In Ga As-APD/Preamp Receiver Ratings -40 to +85 -40 to +85 -7 to 0 0 to VB 1.0 Unit °C °C V V m A OPTICAL & ELECTRICAL CHARACTERISTICS (Tc=25°C, λ=1,310/1,550nm, Vss=-5.2V, unless otherwise specified) Parameter APD Responsivity APD Breakdown Voltage Temperature Coefficient of VB AC Transimpedance Symbol R15 R13 VB γ Zt Test Conditions 1,550nm, M=1 1,310nm, M=1 ID=10µA (Note 3) AC-Coupled, f=10MHz, RL=50Ω, Pin <=-20d Bm, AC-Coupled, RL=50Ω, M=3 to 15, -3d Bm from 1MHz AC-Coupled, RL=50Ω, Average within BW 622Mb/s NRZ, PRBS=223-1, B.E.R.=10-10, VR is set at optimum value Tc=-40 to +85°C 622Mb/s NRZ, M=3, PRBS=223-1, B.E.R.=10-10, VR is set at optimum value Tc=-40 to +85°C, M=3 Power Supply Current Power Supply Voltage Iss Vss Min. 0.80 0.75 40 0.08 3.0 Limits Typ. 0.85 0.85 50 0.12 3.8 Max. 70 0.15 Unit A/W A/W V V/°C kΩ Bandwidth Equivalent Input Noise Current Density .. - MHz in - 2.64 -42 3.2 -40 p A/ Hz d Bm Sensitivity Pr -5 -41 - -39 - d Bm d Bm Maximum Overload Po -7 -5.46 -5.2 40 -4.94 d Bm m A...