EUP3421 Datasheet | Eutech Microelectronics

2A, Synchronous Step-Down Converter DESCRIPTION The EUP3421 is a 1 MHz fixed frequency synchronous, current-mode, step-down dc-dc converter capable of providing up to 2A output current. The EUP3421 operates from an input range of 2.7V to 5.5V and provides a regulated output voltage from 0.8V to 5V. The internal synchronous power switch improves efficiency and eliminates the need for an external Schottky diode. Forced PWM operation provides very low output ripple voltage for noise sensitive applications. The EUP3421 Features short circuit and thermal protection circuits to improve system reliability. Externally adjustable soft-start avoids input inrush current during startup. The EUP3421 is available in SOP-8 package. Features 2.7V to 5.5V Input Voltage Range High Efficiency up to 96% 2A Available Load Current 100/60mΩ Integrated PFET/NFET Switches 1MHz Switching Frequency 100% Duty Cycle Low Dropout Operation Short Circuit and Thermal Protection Integrated UVLO Excellent Line and Load Transient Response Available in SOP-8 Package Ro HS pliant and 100% Lead(Pb)-Free Halogen-Free APPLICATIONS High Performance DSPs, FPGAs, ASICs and Microprocessors Base Station, Tele, and Networking Equipment Power Supplies e PC and Net PCs Typical Application Circuit Figure1. Typical Application Circuit DS3421 Ver1.0 Jun. 2011 Pin Configurations Package Type Pin Configurations SOP-8 Pin Description PIN AVIN SS GND FB EN PGND LX PVIN SOP-8 1 2 3 4 5 6 7 8 DESCRIPTION Analog input supply which is connected to PVIN through a low pass RC filter. Soft-start pin. An internal pull up current source charges an external capacitor to set the soft-start ramp rate. Analog ground. Feedback pin. Connect it to an external resistor divider to set output voltage. Chip enable pin. Forcing this pin above 1.5V enables the part. Forcing this pin below 0.3V shut down the device. Internal pull high with a resistor. Power ground. Switch node connected to inductor. This pin...