Datasheet4U Logo Datasheet4U.com

EUP3426 - Synchronous Step-Down Converter

General Description

The EUP3426 is a 1 MHz fixed frequency synchronous, current-mode, step-down dc-dc converter capable of providing up to 3A output current.

The EUP3426 operates from an input range of 2.7V to 5.5V and provides a regulated output voltage from 0.6V to 5V.

Key Features

  • short circuit and thermal protection circuits to improve system reliability. Internally soft-start avoids input inrush current during startup. The EUP3426 is available in TDFN 3mm × 3mm 10-pin package with the exposed pad and SOP-8 package with the exposed pad.

📥 Download Datasheet

Datasheet Details

Part number EUP3426
Manufacturer Eutech Microelectronics
File Size 0.98 MB
Description Synchronous Step-Down Converter
Datasheet download datasheet EUP3426 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
EUP3427 Synchronous Step-Down Converter Eutech
EUP3618 Charge Pump Flash LED Driver Eutech
EUP7998 Sink/Source DDR Termination Regulator Eutech
EUP8090 1A Linear Li-Ion/Polymer Charger IC Eutech

Other Datasheets by Eutech Microelectronics

Part Number Description
EUP3420 Synchronous Step-Down Converter
EUP3421 Synchronous Step-Down Converter
EUP3423 Synchronous Step-Down Converter
EUP3425 Synchronous Step-Down Converter
EUP3427 Synchronous Step-Down Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
EUP3426 3A, Synchronous Step-Down Converter DESCRIPTION The EUP3426 is a 1 MHz fixed frequency synchronous, current-mode, step-down dc-dc converter capable of providing up to 3A output current. The EUP3426 operates from an input range of 2.7V to 5.5V and provides a regulated output voltage from 0.6V to 5V. The internal synchronous power switch improves efficiency and eliminates the need for an external Schottky diode. The EUP3426 can be externally set for either forced PWM continuous mode or pulse skipping mode. Forced PWM operation provides very low output ripple voltage for noise sensitive applications while pulse skipping operation improves light load efficiency by reducing switching loss. The EUP3426 features short circuit and thermal protection circuits to improve system reliability.