EUP3546 - Dual Power-Distribution Switch

Datasheet Summary

Description

The EUP3546 incorporates dual 95mΩ P-channel MOSFET power switches for power-distribution systems that require multiple power switches in a single package.

Each switch is controlled by a logic enable input.

Features

Dual 95mΩ High-Side MOSFET 1A (EUP3546) Current Limits with Fold-back 1.5A (EUP3546-15) Current Limits with Fold-back Operating Range:2.7V to 5.5V 300µS Typical Rise Time Under voltage Lockout 15µA Quiescent Supply Current 1µA Shutdown Supply Current Logic Level Enable Pin, Available with Active-Low Version No Reverse Current when Power Off Open-Drain Over-Current Flag Outputs with fault-blanking Available in SOP-8 and SOP-8 (EP) Packages RoHS Compliant and 100% Lead(Pb)-Free Halogen-Free APPLIC.

Eutech Microelectronics

📥 Download Datasheet

Datasheet Details

Part number	EUP3546
Manufacturer	Eutech Microelectronics
File Size	653.24 KB
Description	Dual Power-Distribution Switch
Datasheet	EUP3546 Datasheet
Additional preview pages of the EUP3546 datasheet.

📁 Similar Datasheet

EUP3427 - Synchronous Step-Down Converter (Eutech)
EUP3618 - Charge Pump Flash LED Driver (Eutech)
EUP7998 - Sink/Source DDR Termination Regulator (Eutech)
EUP8090 - 1A Linear Li-Ion/Polymer Charger IC (Eutech)

Other Datasheets by Eutech Microelectronics

EUP3542 - Dual Power-Distribution Switch
EUP3545 - USB Power-Distribution Switch
EUP3545A - USB Power-Distribution Switch
EUP3502A - 1.5A Line Switch
EUP3504 - 1.8A Line Switch
EUP3507 - 600mA Line Switch
EUP3510 - 1 Amp Current Limited Load Switch
EUP3511 - 1 Amp Current Limited Load Switch

Full PDF Text Transcription

Click to expand full text

EUP3546 Dual Power-Distribution Switch with Fault-Blanking DESCRIPTION The EUP3546 incorporates dual 95mΩ P-channel MOSFET power switches for power-distribution systems that require multiple power switches in a single package. Each switch is controlled by a logic enable input. When either output load exceeds the current-limit threshold or a short is present, the device limits the outputs current to a safe level by switching into a constant-current limit mode with fold back, pulling the over-current (OCB(s)) logic output low. When continuous heavy overloads or short-circuits increase the power dissipation in the switches, causing the junction temperature to raise, a thermal protection circuit shutdown the switches to prevent damage.

Published: Jun 22, 2019 |