Datasheet4U Logo Datasheet4U.com

XR16C872 - DUAL UART

General Description

The XR16C8721 (872) is a dual universal asynchronous receiver and transmitter (UART) with a 1284 bi-directional parallel port and ISA Bus Plug-and-Play (PnP) interface.

The PnP interface supports auto configuration for desktop and embedded PC computers.

Key Features

  • of 128 bytes of transmit and receive FIFOs, programmable transmit and receive FIFO trigger levels, transmit and receive FIFO counters, IrDA (Infrared Data Association) encoder/decoder, automatic RTS/CTS hardware flow control with selectable hysteresis and automatic software (Xon/Xoff) flow control. On board status registers provide interrupt priorities, receive data errors and modem status. Each channel has a programmable baud rate generator to provide data rates up to 460.8Kbps. The bidirection.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
XR16C854D 2.97V TO 5.5V QUAD UART Exar
XR16C450 Asynchronous Receiver and Transmitter Exar
XR16C452 Dual Universal Asynchronous Receiver and Transmitter Exar
XR16M554 1.62V To 3.63V Quad UART Sipex Corporation
XR16M554D 1.62V To 3.63V Quad UART Sipex Corporation

Other Datasheets by Exar (now MaxLinear)

Part Number Description
XR16C850 UART with 128-byte FIFOs FIFO Counters and Half-duplex Control
XR16C854 2.97V TO 5.5V QUAD UART
XR16C864 2.97V TO 5.5V QUAD UART
XR16C2450 2.97V TO 5.5V DUART
XR16C2550 2.97V TO 5.5V DUART

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DISCONTINUED XR16C872 DUAL UART WITH 1284 PARALLEL PORT AND PLUG-AND-PLAY CONTROLLER DESCRIPTION August 2003 The XR16C8721 (872) is a dual universal asynchronous receiver and transmitter (UART) with a 1284 bi-directional parallel port and ISA Bus Plug-and-Play (PnP) interface. The PnP interface supports auto configuration for desktop and embedded PC computers. The host bus interface can also be configured to manually support standard PC addresses COM1-4 and LPT1-2. The parallel port is compatible to IEEE 1284 specification and supports Compatible Centronics, Extended Capability (ECP) and Enhanced Parallel Port (EPP) protocols.