SP5301
SP5301 is Universal Serial Bus Transceiver manufactured by Exar.
DESCRIPTION
The SP5301 is a half-duplex Universal Serial Bus (USB) differential transceiver that interfaces with the USB Serial Interface Engine (SIE). The SP5301 is designed to allow 3.3V or 5.0V standard and programmable logic to interface with the physical layer of the Universal Bus. The USB protocol can support multiple connections for up to 127 physical devices posed of many diverse functions. It is capable of transmitting and receiving serial data at both full speed (12Mbps) and low speed (1.5Mbps) data rates. Implementation of the Serial Interface Engine along with the USB transceiver allow the designer to make flexible USB patible devices with widely available logic ponents. The SP5301 is specifically geared towards low-cost USB solutions for the PC peripheral market.
Exar Corporation 48720 Kato Road, Fremont CA, 94538
- 510-668-7017
- .exar.
SP5301_100_081710
ABSOLUTE MAXIMUM RATINGS
These are stress ratings only and functional operation of the device at these ratings or any other above those indicated in the operation sections of the specifications below is not implied. Exposure to absolute maximum rating conditions for extended periods of time may affect reliability and cause permanent damage to the device. VCC -0.5V to +6.5V IGND, ICC (DC VCC or GND current) ±100m A Input Current and Voltages:
IIK (DC input diode current at VI < 0) -50m A VI (DC input voltage, Note 1) -0.5 to +6.5V VI/O (DC input voltage range, I/O) -0.5V to VCC + 0.5V Output Currents and Voltages: IOK (DC output diode current where
VO > VCC or VO < 0) ±50m A VO (DC output voltage),
Note 1 -0.5V to (VCC + 0.5V) IO (DC output source or sink current for
VP/VM/RCV/RERR/RSEO pins,VO = 0 to...
