SP5301 Datasheet | Sipex

DESCRIPTION The SP5301 is a half-duplex Universal Serial Bus (USB) differential transceiver that interfaces with the USB Serial Interface Engine (SIE). The SP5301 is designed to allow 3.3V or 5.0V standard and programmable logic to interface with the physical layer of the Universal Bus. The USB protocol can support multiple connections for up to 127 physical devices posed of many diverse functions. It is capable of transmitting and receiving serial data at both full speed (12Mbps) and low speed (1.5Mbps) data rates. Implementation of the Serial Interface Engine along with the USB transceiver allow the designer to make flexible USB patible devices with widely available logic ponents. The SP5301 is specifically geared towards low-cost USB solutions for the PC peripheral market. RERR 1 OE RCV VP 2 3 4 14 13 12 11 10 9 8 VCC VMO VPO D+ DSPEED RSEO SPEED VMO VPO OE DD+ Receiver Logic VM 5 SUSPND 6 GND 7 SUSPND RCV RERR RSE0 VP VM SP5301DS/10 SP5301 Universal Serial Bus Transceiver © Copyright 2000 Sipex Corporation ABSOLUTE MAXIMUM RATINGS These are stress ratings only and functional operation of the device at these ratings or any other above those indicated in the operation sections of the specifications below is not implied. Exposure to absolute maximum rating conditions for extended periods of time may affect reliability and cause permanent damage to the device. VCC -0.5V to +6.5V IGND, ICC (DC VCC or GND current) +100m A Input Current and Voltages: IIK (DC input diode current at VI < 0) -50m A VI (DC input voltage, Note 1) -0.5 to +6.5V VI/O (DC input voltage range, I/O) -0.5V to VC C 0.5V Output Currents and Voltages: IOK (DC output diode current where VO > VCC or VO < 0) +50m A VO (DC output voltage), Note 1 -0.5V to...