FTDI FT230X
The FT230X is a USB to serial UART interface with optimised pin count for smaller PCB designs and the following advanced features: Single chip USB to asynchronous serial data transfer interface.| Part No. | FT230X |
|---|---|
| Datasheet | FT230X Download |
| Manufacturer |  FTDI |
| Description | USB to BASIC UART |
| Buy | Stock & Price |
FT230X USB TO BASIC UART IC Version 1.4 Document No.: FT_000566 Clearance No.: FTDI# 260 Future Technology Devices International Ltd. FT230X (USB to BASIC UART IC) The FT230X is a USB to serial UART interface with optimised pin count for smaller PCB designs and the following advanced features:
● Single chip USB to asynchronous serial data transfer interface.
● Entire USB protocol handled on the chip. No USB specific firmware programming required.
● Fully integrated 2048 byte multi-timeprogrammable (MTP) memory, storing device descriptors and CBUS I/O configuration.
●
●
●
●
●
● Fully integrated clock generation with no external crystal required plus optional clock output selection enabling a glue-less interface to external MCU or
● FPGA.
● Data transfer rates from 300 baud to 3 Mbaud
● (RS422, RS485, and RS232) at TTL levels.
●
● 512 byte receive buffer and 512 byte transmit buffer utilising buffer smoothing technology to
● allow for high data thro
● Single chip USB to asynchronous serial data transfer interface.
● Entire USB protocol handled on the chip. No USB specific firmware programming required.
● Fully integrated 2048 byte multi-timeprogrammable (MTP) memory, storing device descriptors and CBUS I/O configuration.
●
●
●
●
●
● Fully integrated clock generation with no external crystal required plus optional clock output selection enabling a glue-less interface to external MCU or
● FPGA.
● Data transfer rates from 300 baud to 3 Mbaud
● (RS422, RS485, and RS232) at TTL levels.
●
● 512 byte receive buffer and 512 byte transmit buffer utilising buffer smoothing technology to
● allow for high data thro
