Datasheet4U Logo Datasheet4U.com

FT230XS-xxxx - USB to BASIC UART

This page provides the datasheet information for the FT230XS-xxxx, a member of the FT230X USB to BASIC UART family.

Datasheet Summary

Description

of each function please refer to Section 4.

Features

  • Single chip USB to asynchronous serial data transfer interface.
  • Entire USB protocol handled on the chip. No USB specific firmware programming required.
  • Fully integrated 2048 byte multi-timeprogrammable (MTP) memory, storing device descriptors and CBUS I/O configuration.
  • Fully integrated clock generation with no external crystal required plus optional clock output selection enabling a glue-less interface to external MCU or.
  • FPGA.

📥 Download Datasheet

Datasheet preview – FT230XS-xxxx

Datasheet Details

Part number FT230XS-xxxx
Manufacturer FTDI
File Size 685.53 KB
Description USB to BASIC UART
Datasheet download datasheet FT230XS-xxxx Datasheet
Additional preview pages of the FT230XS-xxxx datasheet.

📁 Similar Datasheet

  • FT232BL - USB UART (Future Technology Devices)
  • FT232BQ - USB UART (Future Technology Devices)
  • FT232H - Single Channel Hi-Speed USB to Multipurpose UART/FIFO (Future Technology Devices)
  • FT2000A - Fast Silicon Rectifiers (Diotec Semiconductor)
  • FT2000AA - Superfast Silicon Rectifiers (Diotec)
  • FT2000AA - FAST RECOVERY RECTIFIERS (EIC)
  • FT2000AB - Superfast Silicon Rectifiers (Diotec)
  • FT2000AB - FAST RECOVERY RECTIFIERS (EIC)
  • FT2000AC - Superfast Silicon Rectifiers (Diotec)
  • FT2000AD - Superfast Silicon Rectifiers (Diotec)
Other Datasheets by FTDI

Full PDF Text Transcription

Click to expand full text
FT230X USB TO BASIC UART IC Version 1.3 Document No.: FT_000566 Clearance No.: FTDI# 260 Future Technology Devices International Ltd. FT230X (USB to BASIC UART IC) The FT230X is a USB to serial UART interface with optimised pin count for smaller PCB designs and the following advanced features:  Single chip USB to asynchronous serial data transfer interface.  Entire USB protocol handled on the chip. No USB specific firmware programming required.  Fully integrated 2048 byte multi-timeprogrammable (MTP) memory, storing device descriptors and CBUS I/O configuration.       Fully integrated clock generation with no external crystal required plus optional clock output selection enabling a glue-less interface to external MCU or  FPGA.
Published: |