FTDI UMFT200XD
UMFT200XD is a USB to I2C breakout module 1 Introduction The UMFT200XD breakout module utilizes FTDI’s FT200XD IC to convert USB to an I2C. These modules do not have a USB connector; instead the modules plug directly into the USB host connector and the pads of the PCB makes electrical contact with the electrical contacts of the USB connector. The I2C interface operates at +3.3V voltage levels, however all I/Os are 5V tolerant.| Part No. | UMFT200XD |
|---|---|
| Datasheet | UMFT200XD Download |
| Manufacturer |  FTDI |
| Description | Breakout Modules |
| Buy | Stock & Price |
FEATURES
The UMFT200XD is a breakout board that converts USB2.0 Full-Speed to I2C. 1.2 Ordering Information Module UMFT200XD UMFT200XD-NC Interface I2C I2CFEATURES
USB to I2C with four control bus lines, 3.3V power out limited to 50mA and 5V with as safety fuse. I2C signals available via 8 pin female connector. USB to I2C with four control bus lines, 3.3V power out limited to 50mA and 5V with as safety fuse. I2C signals available via 8 pads on the PCB UMFT200XD-WE I2C USB to I2C with four control bus lines, 3.3V power out limited to 50mA and 5V with as safety fuse. I2C signals available via 8, 6” flying leads connected to the PCB pads. 2 Driver Support Royalty-Free VIRTUAL COM PORT (VCP) DRIVERS for:● Windows 7 32,64-bit
● Windows Vista
● Windows XP 32,64-bit
● Windows XP Embedded
● Windows CE.NET 4.2 , 5.0 and 6.0
● MAC OS OS-X
● Linux 3.0 and greater
● Android Royalty-Free D2XX Direct Drivers (USB Drivers + DLL S/W Interface):
● Windows 7 32,64-bit
● Windows Vista
● Windows XP 32,6...
