Datasheet4U Logo Datasheet4U.com

UMFT230XA - USB to Basic UART Development Module

General Description

5 4.3 CBUS Signal Options 6 5 Module Configurations 7 5.1 Solder Link Configuration Options 7 5.2 Solder Link Modifications 7 5.3 Bus Power Configuration 8 5.4 Self Powered Configuration 9 5.5 USB Bus Powered with Power Switching Configuration 10 5.6 Variable IO Voltage Supply 11 5.7 3.3V Volt

Key Features

  • The UMFT230XA is a development module for FTDI’s FT230XQ, one of the devices from FTDI’s range of USB interface bridging integrated circuit devices. FT230X is a USB to UART interface with a battery charger detection feature, which can allow batteries to be charged with a higher current from a dedicated charger port (without the FT230X being enumerated). In addition, asynchronous and synchronous bit bang interface modes are available. The internally generated clock (6MHz, 12MHz and 24MHz) can be.

📥 Download Datasheet

Datasheet Details

Part number UMFT230XA
Manufacturer FTDI
File Size 658.14 KB
Description USB to Basic UART Development Module
Datasheet download datasheet UMFT230XA Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
UMF-130A-152 Transformer Talema
UMF0J010MDD ALUMINUM ELECTROLYTIC CAPACITORS Nichicon
UMF0J100MDD ALUMINUM ELECTROLYTIC CAPACITORS Nichicon
UMF0J101MDD ALUMINUM ELECTROLYTIC CAPACITORS Nichicon
UMF0J150MDD ALUMINUM ELECTROLYTIC CAPACITORS Nichicon

Other Datasheets by FTDI

Part Number Description
UMFT231XA USB to Full-Handshake UART Development Module
UMFT231XC USB to UART
UMFT232HPEV-S Sink Module
UMFT200XD Breakout Modules
UMFT260EV1A HID-class USB to UART/I2C Module

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Future Technology Devices International Datasheet UMFT230XA USB to Basic UART Development Module UMFT230XA Datasheet Version 1.3 Document Reference No.: FT_000519 Clearance No.: FTDI# 269 UMFT230XA is a USB to Basic UART DIP module with a 0.3” row pitch. 1 Introduction 1.1 Features The UMFT230XA is a development module for FTDI’s FT230XQ, one of the devices from FTDI’s range of USB interface bridging integrated circuit devices. FT230X is a USB to UART interface with a battery charger detection feature, which can allow batteries to be charged with a higher current from a dedicated charger port (without the FT230X being enumerated). In addition, asynchronous and synchronous bit bang interface modes are available.