Datasheet4U Logo Datasheet4U.com

74ACT1284 - IEEE 1284 Transceiver

Download the 74ACT1284 datasheet PDF. This datasheet also covers the 74ACT variant, as both devices belong to the same ieee 1284 transceiver family and are provided as variant models within a single manufacturer datasheet.

General Description

The 74ACT1284 contains four non-inverting bidirectional buffers and three non-inverting buffers with open Drain outputs and high drive capability on the B Ports.

It is intended to provide a standard signaling method for a bi-direction parallel peripheral in an Extended Capabilities Port mode (ECP).

Key Features

  • s TTL-compatible inputs s A Ports have standard 4 mA totem pole outputs s Typical input hysteresis of 0.5V s B Port high drive source/sink capability of 14 mA s Bidirectional non-inverting buffers s Supports IEEE P1284 Level 1 and Level 2 signaling standards for bidirectional parallel communications between personal computers and printing peripherals s B Port outputs in High Impedance mode during power down s Guaranteed 4000V minimum ESD protection Ordering Code: Order Number 74ACT1284SC 74ACT1.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (74ACT-1284.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
74ACT125 QUAD BUFFER ON Semiconductor
74ACT125 QUAD BUS BUFFERS STMicroelectronics
74ACT125 Quad Buffer National Semiconductor
74ACT10 TRIPLE 3-INPUT NAND GATE STMicroelectronics
74ACT10 Triple 3-Input NAND Gate National Semiconductor

Other Datasheets by Fairchild (now onsemi)

Part Number Description
74ACT125 Quad Buffer
74ACT10 Triple 3-Input NAND Gate
74ACT109 Dual JK Positive Edge-Triggered Flip-Flop
74ACT139 Dual 1-of-4 Decoder/Demultiplexer
74ACT14 Hex Inverter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com 74ACT1284 IEEE 1284 Transceiver June 1996 Revised November 2000 74ACT1284 IEEE 1284 Transceiver General Description The 74ACT1284 contains four non-inverting bidirectional buffers and three non-inverting buffers with open Drain outputs and high drive capability on the B Ports. It is intended to provide a standard signaling method for a bi-direction parallel peripheral in an Extended Capabilities Port mode (ECP). The HD (active HIGH) input pin enables the B Ports to switch from open Drain to a high drive totem pole output, capable of sourcing 14 mA on all seven buffers. The DIR input determines the direction of data flow on the bidirectional buffers. DIR (active HIGH) enables data flow from A Ports to B Ports.