FL3100T Datasheet | Fairchild Semiconductor

- Low-Side Gate Driver with PWM Dimming Control for Smart LED Lighting August 2015 FL3100T Low-Side Gate Driver with LED PWM Dimming Control for Smart LED Lighting Features - Non-inverting Input Logic with DIM Control Input for PWM Dimming Down to 0.1% for Hybrid Dimming - 4.5 to 18 V Operating Range - TTL Inputs Independent of Supply Voltage - 2.5 A Sink / 1.8 A Source at VOUT = 6 V - Internal Resistors Turn Driver Off If No Inputs - 13 ns Typical Rise Time and 9 ns Typical Fall-Time with 1 n F Load - Miller Drive™ Technology - Typical Propagation Delay Time Under 20 ns with Input Falling or Rising - 6-Lead, 2 x 2 mm MLP or 5-Pin, SOT23 Packages - Rated from -40°C to 125°C Ambient Applications - Smart LED Drivers with Accurate PWM Dimming - General LED Lighting Description The FL3100T 2 A gate driver is designed to drive an Nchannel enhancement-mode MOSFET in low-side switching applications by providing high peak current pulses during the short switching intervals. The FL3100T has two inputs that can be configured to operate in non-inverting (IN) mode with a DIM pin for PWM dimming control of the LED Driver. High accuracy PWM dimming control required in smart LED drivers is possible by adjusting the duty ratio of the DIM input. If one or both inputs are left unconnected, internal resistors bias the inputs such that the output is pulled LOW to hold the power MOSFET off. The driver is available with fixed TTL input thresholds. Internal circuitry provides an under-voltage lockout function by holding the output LOW until the supply voltage is within operating range. The FL3100T delivers fast MOSFET switching performance, which helps maximize efficiency in high-frequency LED driver designs. The FL3100T is available in a 5-pin, SOT23 or a 2 x 2 mm, 6-lead, Molded Leadless Package (MLP) for the smallest size with excellent thermal performance. Typical Application Circuit ILED FL3100T IN VDD OUT Figure 1. LED PWM Dimming Application Circuit for...