Datasheet4U Logo Datasheet4U.com

FSA201 - USB2.0 Full-Speed and Audio Switches

General Description

The FSA201 is a Double-Pole, Double Throw (DPDT) multiplexer that combines a low-distortion audio and a USB2.0 Full-Speed (FS) switch path.

This configuration enables audio and USB data to share a common connector port.

The architecture is designed to allow audio signals to swing below ground.

Key Features

  • 3Ω Typical ON Resistance -3db Bandwidth: > 250MHz Low Power Consumption Packaged in Pb-free 10-Lead MicroPak™ (1.6 x 2.1mm), 10-pin MSOP (Preliminary) Power-off Protection on Common D+/R, D-/L Ports Automatically Detects Vbus for Switch Path Selection.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
FSA2259 Dual-SPDT Analog Switch ON Semiconductor
FSA2268 Low-Voltage Dual-SPDT Analog Switch ON Semiconductor
FSA2268T Low-Voltage Dual-SPDT Analog Switch ON Semiconductor
FSA2270T Dual-SPDT Analog Switch ON Semiconductor
FSA2457 Dual DPDT Analog Data Switch ON Semiconductor

Other Datasheets by Fairchild (now onsemi)

Part Number Description
FSA2000 Auto-Selecting HS-USB Switch
FSA203 Negative Swing Audio Switch
FSA2147 DPST Analog Switch
FSA2156 Low-Voltage SPST 0.4OHM Analog Switch
FSA221 USB2.0 High-Speed (480Mbps) and Audio Switches

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Click to see this datasheet in Simplified Chinese! FSA201 USB2.0 Full-Speed and Audio Switches with Negative Signal Capability January 2007 FSA201 USB2.0 Full-Speed and Audio Switches with Negative Signal Capability Features ƒ ƒ ƒ ƒ ƒ ƒ 3Ω Typical ON Resistance -3db Bandwidth: > 250MHz Low Power Consumption Packaged in Pb-free 10-Lead MicroPak™ (1.6 x 2.1mm), 10-pin MSOP (Preliminary) Power-off Protection on Common D+/R, D-/L Ports Automatically Detects Vbus for Switch Path Selection Description The FSA201 is a Double-Pole, Double Throw (DPDT) multiplexer that combines a low-distortion audio and a USB2.0 Full-Speed (FS) switch path. This configuration enables audio and USB data to share a common connector port. The architecture is designed to allow audio signals to swing below ground.