FSA3031 Datasheet | Fairchild Semiconductor

Features - Low On Capacitance: 4.6 p F/6.75 p F MHL/USB (Typical) - Low Power Consumption: 30 μA Maximum - Supports MHL Rev. 2.0 - Passes 1080 p/60 fps (3 Gbps) MHL Data Eye Diagram Mask pliance - MHL Data Rate: ≥4.7Gbps with Ideal Input Source - Packaged in 12-Lead UMLP (1.8 x 1.8 mm) - Over-Voltage Tolerance (OVT) on all USB Ports Up to 5.25 V without External ponents Applications - Cell Phones and Digital Cameras IMPORTANT NOTE: For additional performance information, please contact interface@fairchildsemi.. Description The FSA3031 is a bi-directional, low-power, high-speed, 3:1, dual USB2.0 and MHL switch. Configured as a double-pole, triple-throw (DP3T) switch; it is optimized for switching between dual high- or full-speed USB and Mobile High-Definition Link sources (MHL™ Rev. 2.0 specification). The FSA3031 contains special circuitry on the switch I/O pins, for applications where the VCC supply is powered off (VCC=0), that allows the device to withstand an over-voltage condition. This switch is designed to minimize current consumption even when the control voltage applied to the control pins is lower than the supply voltage (VCC). This feature is especially valuable to mobile applications, such as cell phones; allowing direct interface with the general-purpose I/Os of the baseband processor. Other applications include switching and connector sharing in portable cell phones, digital cameras, and notebook puters. Ordering Information Part Number FSA3031UMX Top Mark Operating Temperature Range Package -40 to +85°C 12-Lead, Ultrathin Molded Leadless Package (UMLP), 1.8 mm x 1.8 mm Figure 1. Typical Application All trademarks are the property of their respective owners. © 2011 Fairchild Semiconductor Corporation FSA3031 - Rev. 1.0.4 .fairchildsemi. - Dual High-Speed USB2.0 Switch with Mobile High-Definition Link (MHL™) Switch Analog Symbol Figure 2. Analog Symbol Table 1. Data Switch Select Truth Table SEL1(1) SEL0(1) Function...