FSA3230 Datasheet | Fairchild Semiconductor

Features - Low On Capacitance: 6 p F / 6 p F MHL / USB (Typical) - Low Power Consumption: 30 μA Maximum - Supports MHL Rev. 2.0 - MHL Data Rate: 4.0 Gbps - Audio Swing: -1.5 V to +1.5 V (Typical) - VBUS Powers Device with No VCC - Packaged in 16-Lead UMLP (1.8 x 2.6 mm) - Over-Voltage Tolerance (OVT) on all USB Ports, Up to 5.25 V without External ponents Applications - Cell Phones and Digital Cameras Description The FSA3230 is a bi-directional, low-power, high-speed, 3:1, USB2.0, MHL™ and audio switch. Configured as a double-pole, triple-throw (DP3T) switch, it is optimized for switching between high- or full-speed USB, Mobile High-Definition Link sources (per MHL Rev. 2.0 specification) and negative swing capable audio. A Single-Pole, Double-Throw (SPDT) switch is provided for ID. This ID switch provides path to support On-The Go (OTG) munication for the USB Path OR CBUS for the MHL Path. The FSA3230 contains special circuitry on the switch I/O pins, for applications where the VCC supply is powered off (VCC=0), that allows the device to withstand an over-voltage condition. This switch is designed to minimize current consumption even when the control voltage applied to the control pins is lower than the supply voltage (VCC). This is especially valuable in mobile applications, such as cell phones; allowing direct interface with the general-purpose I/Os of the baseband processor. Other applications include switching and connector sharing in portable cell phones, digital cameras, and notebook puters. Ordering Information Part Number Top Mark Operating Temperature Range Package FSA3230UMX -40 to +85°C 16-Lead, Ultrathin Molded Leadless Package (UMLP), 1.8 x 2.6 mm © 2012 Fairchild Semiconductor Corporation FSA3230 - Rev. 1.0.2 .fairchildsemi. - High-Speed USB2.0 Switch/Mobile High-Definition Link (MHL™) Switch with Negative Swing Audio Analog Symbol USBD+ MHL+ R VCC VBUS D+ USBD- MHL- D- CBUS ID_USB Sel1 Sel0 Control ID GND Figure 1....