FSB50825A Datasheet | Fairchild Semiconductor

FSB50825A Motion SPM® 5 Series FSB50825A Motion SPM® 5 Series April 2015 Features - UL Certified No. E209204 (UL1557) - 250 V RDS(on) = 0.45 Max FRFET MOSFET 3- Phase Inverter with Gate Drivers and Protection - Built-in Bootstrap Diodes Simplify PCB Layout - Separate Open-Source Pins from Low-Side MOSFETs for Three-Phase Current-Sensing - Active-HIGH Interface, Works with 3.3 / 5 V Logic, Schmitt-trigger Input - Optimized for Low Electromagnetic Interference - HVIC Temperature-Sensing Built-in for Temperature Monitoring - HVIC for Gate Driving and Under-Voltage Protection - Isolation Rating: 1500 Vrms / 1 min. - Ro HS pliant Applications - 3-Phase Inverter Driver for Small Power AC Motor Drives Related Source - RD-FSB50450A - Reference Design for Motion SPM 5 Series Ver.2 - AN-9082 - Motion SPM5 Series Thermal Performance by Contact Pressure - AN-9080 - User’s Guide for Motion SPM 5 Series V2 General Description The FSB50825A is an advanced Motion SPM® 5 module providing a fully-featured, high-performance inverter output stage for AC Induction, BLDC and PMSM motors. These modules integrate optimized gate drive of the built-in MOSFETs(FRFET® technology) to minimize EMI and losses, while also providing multiple on-module protection Features including under-voltage lockouts and thermal monitoring. The built-in high-speed HVIC requires only a single supply voltage and translates the ining logic-level gate inputs to the high-voltage, high-current drive signals required to properly drive the module's internal MOSFETs. Separate open-source MOSFET terminals are available for each phase to support the widest variety of control algorithms. Package Marking & Ordering Information Device Marking Device Package...